PDA

View Full Version : ID needed.


GrayTech
08-03-2017, 02:03 PM
Hoping someone here can id this luber for me. Can't find a match online so far.
https://uploads.tapatalk-cdn.com/20170803/c67ece97cd58bf4c537e6ff23c484805.jpg
GrayTech
08-04-2017, 10:15 AM
Bump for an answer....
ulav8r
08-04-2017, 09:02 PM
Looks shop made with found components.
GrayTech
08-05-2017, 04:47 PM
Still hoping for an ID...
KenT7021
08-05-2017, 05:41 PM
Looks to be home built.A side view would help.
lefty o
08-05-2017, 08:23 PM
home made
GrayTech
08-05-2017, 10:06 PM
Side view. Not the clearest but best I can do for now. Thanks for the replies.https://uploads.tapatalk-cdn.com/20170806/d62a233ff09f3f0653a99aa4affd52a8.jpg
Blanket
08-05-2017, 11:08 PM
homade
Grmps
08-06-2017, 02:01 AM
Could it be a DIY grease packer? Do you have pictures from the rt side
GrayTech
08-06-2017, 09:41 AM
Unfortunately it will have to remain a mystery until next week when I have it in my possession. Its bolted to a shelf along with 2 powder measures and an older RCBS press.
I'm just hoping it takes removable sizing dies, but not holding my breath.
psweigle
08-09-2017, 09:02 AM
It looks to be a modified bearing packer. Definitely cool. Someone put some thought into it.