View Full Version : Round nose flat point boolits?
sniper
07-25-2017, 12:55 AM
Who makes LBT design 160 gr RNFP boolits?
I have also heard good things about a 147gr 9mm RNFP boolit loaded in 38 Spl.-357 Magnum brass at 38 +P or a smidge higher velocity. I think I am going to try both, if I can find them. Question is, is the Meplat any bigger than a standard SWC ?
Paul105
07-25-2017, 10:00 AM
You might try Montana Bullet Works
https://www.montanabulletworks.com/product-category/pistol/?filter_caliber=357
Scharfschuetze
07-25-2017, 10:50 AM
I have also heard good things about a 147gr 9mm RNFP boolit loaded in 38 Spl.-357 Magnum brass at 38 +P or a smidge higher velocity.
I shoot a 147 grain truncated cone 9mm design sized to .358" in my 357 revolvers at 1,000 fps. While it doesn't have the flat meplat that you want, I can say that the weight is certainly usable and it is very accurate and pleasant to shoot. Without a crimp groove in the 9mm design, I apply a light roll crimp just over the beginning of the ogive to secure the bullet in the case.
Outpost75
07-25-2017, 11:06 AM
Hunter's Supply 190-grain FP is great hunting bullet in .357 with 11 grs. of #2400
http://www.hunters-supply.com/358-cal-190-p-159.html?osCsid=7q5ekej0k1fucp0e26bu4chkg6
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.