9mm mold?

[leadhead]

Who makes a 9mm mold that measures at least .358 dia 125gr round nose plain base?
Thanks for any info.
Denny

[JBinMN]

Using a search engine(Google) with your question gave almost a 100 results.

Here are is a plain based:

http://arsenalmolds.com/index.php?route=product/product&product_id=57

You might find more molds like that from other makers, by just asking your question in the search engine.
;)

G'luck!
:)

[Kirk Miller]

Arsenal molds makes a 130gr. rn that is a clone of the Lee. That mold functions in every 9mm that my friends have. Nearly 18 I believe at last count.
Kirk

[Kirk Miller]

Oops, looks like JB was faster on the keyboard than me
Kirk

[NoAngel]

If you powder coat.....a whole lot of them will finish .358.

[Moonie]

Accurate Molds, if he doesn't have exactly what you want he will make it, quickly.

[Ed_Shot]

+1 for Arsenal's 358-130-RN; mine drops .360 and 130 gr. NOE's 359242 (120 gr) is a real winner also; mine drops .360 and 120 gr. You will not go wrong ordering from Accurate Molds either.

[engineer401]

I've had very good luck with Mountain Molds. I am to the point where I won't use any other brand much at all. You set the diameter when you order the mold.

[superdan]

Looks like NOE's are mostly .358
http://noebulletmolds.com/NV/index.php?cPath=34&osCsid=ujhbd6l5e1qjjos3608rbngon3

[gnostic]

My Lee 120 grain TC 356 drops from the mold at .358-.359 cast from half & half WW and range scrap water quenched. My .429 200 grain drops at .430-.431 so I don't think the .356 and .429 mean anything