Need load data for 8mm Mauser 220 and 230 grain bullet

[mookiie]

Hello all! I am looking for load data for an 8mm Mauser with both 220 and 230 grain projectiles. I would prefer loads using Unique or IMR4064 as those are the two I have on hand. Thanks!https://uploads.tapatalk-cdn.com/20170709/f4f312bfb8beffbcc0c961ce67c5b49c.jpghttps://uploads.tapatalk-cdn.com/20170709/27debe7983f28aaa2648c977f514add2.jpghttps://uploads.tapatalk-cdn.com/20170709/85429c21d05815e4d75f61dcccc3151e.jpghttps://uploads.tapatalk-cdn.com/20170709/2b0958ba4c41d06012616d348731954f.jpg

Sent from my Moto G (4) using Tapatalk

[Grmps]

Look here, you should be able to find some. http://castboolits.gunloads.com/showthread.php?337910-CB-load-data-online-sources&p=4086919&viewfull=1#post4086919

[LAGS]

I too was shooting a Turk mauser loaded with Reloader 7 and some loads with 4759
I was using the NOE 325-365 , 216 gr cast boolit. GC 'ed and Powdercoated
29.0 of reloader 7
and 23.0 of 4759
I have shot Unique in these Mausers with the same boolit in the range of 13 to 16 grains.
Those can be used as a Starting point to work up your load with a slightly Heavier boolit.

[Texas by God]

.30-40 Krag data should work just fine(220gr). Case capacity is similar.

Sent from my SAMSUNG-SGH-I547 using Tapatalk

[OS OK]

I was soliciting help for a 250 grain loading in the 8mm in this thread . . . 8 x 57mm - 252 grain Ideal 320378 - GC'd & PC'd - 40 grains H4831SC - "Uhh ?" . . . http://castboolits.gunloads.com/showthread.php?333384-8-x-57mm-252-grain-Ideal-320378-GC-d-amp-PC-d-40-grains-H4831SC-quot-Uhh-quot . . .

You might find some helpful info here?