View Full Version : 22 hornet molds
edadmartin
07-02-2017, 11:44 PM
Im trying to figure which mold i should get for my cz 22 hornet.noe has the 225-45wfn and lee has the 55 grain mold both are .225. I was hoping to find a mold that was .223 so i can powdercoat and size to .224. Powder coating adds no more than .002 Suggestions?
Ill most likely be bench target shooting to 100 yards.
richhodg66
07-03-2017, 08:11 AM
That NOE 45 WFN is a good one for hunting. I've never put it to a serious accuracy test though, it was plenty good enough for what I wanted, so I didn't try much else.
I have no experience powder coating but it seems like you could get a .223 sizer and run them through it before coating. I size all mine to .225.
Intel6
07-09-2017, 11:00 AM
I have the NOE 37 gr., both plain base and GC 45 gr. WFN and the 55 gr. RCBS copy. Since I have magazine fed Anschutz hornets I tend to use the 37 gr. quite a bit as it seems to have the best shape for that. I do use the WFN in my single shot hornets and find it works well. I have tried the 55 gr. in the hornets but prefer the proper/lighter weights in the hornet and use the 55 gr. in .223.
In the pic below you can see some culls I kept as samples.
http://www.hunt101.com/data/500/medium/22_cal_bullets.jpg
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.