Hollywood press

[Clover Leaf]

Was hoping someone could help me with a Hollywood sr press I know I'm missing pieces. I just don't know anything about these.
Thanks in advance for any help and or advise. Laife

[Markopolo]

You should post a pic of what you DO have... then folks can help ya.

[Clover Leaf]

I'm not that smart! ha If I can get a buddies son maybe he can help! But basically I have just the press and a shell holder. But you make a very good point so I will work on that!

[Kevin Rohrer]

Do a Search here for all the other Hollywood threads and find the type of press you have. Then compare it to what you have and you will see what you are missing. There are several of us here who are knowledgable. Pictures help a lot.

Here are my five:
198927

[Wayne Smith]

Hollywood Sr. needs shell holders and dies. There were primer setters available and some still are. Easier to prime off press for me.

[Clover Leaf]

Complete press.

[Clover Leaf]

Dang nice!

[Clover Leaf]

I think mine looks like the one at the far left that you can barely see but all of them are sweet!

[Clover Leaf]

I have priming stems, shell holders, the swaging tie down bar, a frame bushing to fit Lee 50BMG dies and a couple presses if you need any.
Sweet if you want you can pm me prices! Thank you very much. Laife