salpal48
06-30-2017, 02:29 PM
I have been fooling again with my Murata M18. I have Original Winchester Loaded ammo. But since There 1880's vintage . I chose to pull 10 apart and load Them. All had Berdan Primers 6.45 mm and were NG
I ended up Reprimind with with new RWS 6.45 MM primer and 45Gn 777 by weight reclaiming the Original Paper Patch Boolit
Results were as decent as expected .
The inherent problem with the Murata is the weekness in the bolt leaf spring. Out of the 10 /6 were fired, 2 of which had to be struck Twice.. The one's That did Not fire had a week firing Pin strike
The original BP load was 79 Gn by weight. Black appeared to be 1 F
I ended up Reprimind with with new RWS 6.45 MM primer and 45Gn 777 by weight reclaiming the Original Paper Patch Boolit
Results were as decent as expected .
The inherent problem with the Murata is the weekness in the bolt leaf spring. Out of the 10 /6 were fired, 2 of which had to be struck Twice.. The one's That did Not fire had a week firing Pin strike
The original BP load was 79 Gn by weight. Black appeared to be 1 F