WTS: H&R Handi Barrels

[huntersdog]

All the barrels are in great shape or new. No damaged or nicks in them and non of them have been altered where they fit the hinge pin on the frame. All prices are plus shipping. First "I'll take" gets it.

Buy 2 and get 5% of the second barrel.

Payments accepted are USPS Money Order or Paypal friends and family/gift.

Thank you for looking!





Thanks you folks who bought barrels, I really you appreciate it!

[dogmower]

will tke the 44 barrel
pm sent

[GhostHawk]

Nice snatch on that .44.

[waarp8nt]

I will take number 9 as long as it is factory mounted sights and factory drilled and tapped scope mounts. If the barrel has been drilled on other than the factory, then I will pass. Pm to follow.

[Littlewolf]

i wonder if #2 or #8 the 223bbl's would fit the 410 stock or 22 hornet sb2 stock i have?

[huntersdog]

i wonder if #2 or #8 the 223bbl's would fit the 410 stock or 22 hornet sb2 stock i have?
#2 and #8 are for use on the SB2 frames only.

You never want to use a shotgun frame with a Centerfire rifle cartridge barrel.

[JimB..]

I would love to have #5, but can someone give me a brief rundown on what it takes to get it fit to an existing receiver?

[huntersdog]

I would love to have #5, but can someone give me a brief rundown on what it takes to get it fit to an existing receiver?

You may check YouTube and see if there is a video, I have never done it.

[Beagle333]

5- 45-70 22” heavy barrel with extractor and scope base like new $200

I'll take this one if still available.

[bubba.50]

I would love to have #5, but can someone give me a brief rundown on what it takes to get it fit to an existing receiver?

if yer lucky it will go right on & lock up just like it's 'sposed to.

if it goes on but a little loose ya put shim stock in the groove of the barrel lug that fits around the pivot-pin in the action 'til it fits tight when ya lock it up. usually don't take much.

if it won't quite close & lock up ya carefully hit that same barrel lug groove a lick or two at a time with a fine-cut round file or fine sandpaper on a dowel rod 'til it will lock up. again, usually don't take much.

not as hard or intimidatin' as it may sound from my poor description & can be done by most anybody with any motor skills at all.

[JimB..]

Thanks guys, looks like Beagle jumped while I was napping. I'll think about the others.

[Buddy]

Like bubba.50 explained, it's not difficult to fit barrels. Sometimes you get lucky and they lock up but don't hold your breath. On some I have shimmed, after getting the lockup correct I go back and permanently attach the shim to the barrel with a good epoxy. Not required and not needed if you are going to change the barrel out later.

[JimB..]

I'll take #1. PM sent. As per PM, thinking about others and will let you know tonight.

[JimB..]

Ok, I'll also take #2, PM coming.

[dogmower]

thanks again, Huntersdog, for the barrel and for the prompt shipping. I went out yesterday and shot the .44 - NICE shooter.

[rewinder]

4- .308 22” heavy barrel extractor with scope base like new $175 . I'll take this, Randy , Anyone looking for a Ultra 270 barrel

[huntersdog]

thanks again, Huntersdog, for the barrel and for the prompt shipping. I went out yesterday and shot the .44 - NICE shooter.Thanks for letting me know it arrived and it's a good shooter.

Thanks again!

[GhostHawk]

Those are good prices guys. You can pay up over 500$ for just a barrel on the evilbay.

[huntersdog]

Everyone who received their barrels, they have all fit and locked up without any fitting required.:drinks:

[Beagle333]

'Sure did!
Mine fit perfectly and locked up like it had been matched up at the factory. Thanks!!!! :mrgreen:

[huntersdog]

'Sure did!
Mine fit perfectly and locked up like it had been matched up at the factory. Thanks!!!! :mrgreen:
Happy shooting! I really appreciate you folks buying them!! :drinks:

[Good Cheer]

8- .223 24” heavy barrel ejector with scope base NEW $225

Could you please measure the outside diameter at the muzzle?
Thanks.

[huntersdog]

8- .223 24” heavy barrel ejector with scope base NEW $225

Could you please measure the outside diameter at the muzzle?
Thanks.The O.D is .775 Diameter. Thanks

[dogmower]

Everyone who received their barrels, they have all fit and locked up without any fitting required.

mine dropped right in on my sb2 receiver. shot and ejected 100%

[huntersdog]

mine dropped right in on my sb2 receiver. shot and ejected 100%

Thanks for the feedback. Some of them ejectors, if open the action real fast it will fling the casings right over your shoulder.

[huntersdog]

Bump Thanks

[Butler Ford]

3- .308 22” heavy barrel extractor with scope base NEW $225

I'll take it. PM payment info

BF

[huntersdog]

3- .308 22” heavy barrel extractor with scope base NEW $225

I'll take it. PM payment info

BF
PM sent.

Thanks

[huntersdog]

Bump Thanks

[huntersdog]

Last call

[Cherokee]

#2 and #8 are for use on the SB2 frames only.

You never want to use a shotgun frame with a Centerfire rifle cartridge barrel.


I have a 410 New England Firearms shotgun that I would really like to be in 45 Colt...is that possible ?

[huntersdog]

I have a 410 New England Firearms shotgun that I would really like to be in 45 Colt...is that possible ?

I believe the 410, .357, 45 Colt use the same SB1 frame, I think they call it. But if you would be reloading any HOT or above factory rounds, I would seek a centerfire rifle frame just to be on the safe side.

[huntersdog]

Open to partial trades of Hornady XTP in 45 Cal 185gr, 200gr, 230gr and .357 158gr and 108gr Cal Handgun bullets.

[huntersdog]

Bump Thanks

[huntersdog]

Bump it. Thanks

[huntersdog]

Bump please

[huntersdog]

Bump please

[huntersdog]

Bump please