PDA

View Full Version : WTS: Hornady 45 Colt Casings



bulletbaron
06-25-2017, 01:37 PM
Have acquired a good inventory of Hornady 45 Colt brass, asking $25/100+ brass shipped. These are all brass, and have both silver & gold primers in each lot and I have no idea if they are once fired, they come in from the various indoor gun range I supply to!

THANKS for Looking

birch
06-25-2017, 05:53 PM
Just a hint--there are a bunch of hard core enthusiasts on this forum. You might consider calling them "brass" instead of "casings". I had some hot dogs last night (koegels) and they had very yummy casings!

edwardware
06-25-2017, 08:25 PM
On a positive note, at least you didn't call the caliber "45 Long Colt"!

bulletbaron
06-25-2017, 09:07 PM
OK, to all the hard core reloaders, they are now officially "BRASS"



On a positive note, at least you didn't call the caliber "45 Long Colt"!

birch
06-25-2017, 10:41 PM
What is the difference between 45 Long colt and 45 Colt? ...just had to!!

blltsmth
06-26-2017, 12:02 AM
They may NOT be "long colt" after all. Lay them base up on a flat surface and make sure they are all the same length. I recently purchased a lot of 45 colt and they were cut down to fit the x-tp bullets. CHECK LENGTH TO MAKE SURE!!!

Andy
06-26-2017, 11:37 AM
Along the lines of what blltsmth said I believe some hornady brass is shorter than standard (shorter on purpose right from the factory) so you may have improved luck getting people to buy these if you measure a sampling of the cases and post the measurements in the thread.

bulletbaron
06-26-2017, 11:40 AM
So are their 444 Marlin casings and possibly the 45-70. I don't remember and have none here at the moment!




Along the lines of what blltsmth said I believe some hornady brass is shorter than standard (shorter on purpose right from the factory) so you may have improved luck getting people to buy these if you measure a sampling of the cases and post the measurements in the thread.

reddog81
06-26-2017, 12:01 PM
I'll buy some. How many fit into a small flat rate box?

Ed in North Texas
06-26-2017, 12:14 PM
What methods do you accept for payment?

bulletbaron
06-26-2017, 01:50 PM
100+ easily fit into a USPS small flat box and as for payment, cash, check or money orders are the easiest, Pay Pal is anti gun so I do not like to use them

THANKS for your interest

reddog81
06-26-2017, 02:49 PM
I'll take 100 or however many will fit into a SFRB @ $.25 per piece shipped. PM me the address and I'll send the cash or check ASAP.

Just to clarify - if 150 will fit into a small flat rate box I will buy them for $37.50. If 175 fit i'll buy them for $43.75.... I'm not picky on the quantity, anywhere between 100 and 200+ pieces would be great.

Ed in North Texas
06-26-2017, 11:27 PM
I'll take 200, PM follows.

Ed in North Texas
06-27-2017, 03:20 PM
OK, make it 300 and I'll update my PM.