Will 2 mold lee handle fit 6 cav?

[dkonrai]

Curious if the 2 mold handles interchange with the 6 cav?
Not that I'm cheap but I am. If the 2 molds for the 6 cav then it's a good deal.
Thanks.


Sent from my LG-M210 using Tapatalk

[therealhitman]

Nope. Too short.

http://www.brownells.com/reloading/bullet-casting/casting-moulds/mould-handles/commercial-mold-handles-prod54240.aspx

Still a good deal. All Lee casting gear is unbeatable bang for the buck.

[Grmps]

https://www.amazon.com/s/ref=nb_sb_noss?url=search-alias%3Daps&field-keywords=lee+90005&rh=i%3Aaps%2Ck%3Alee+90005 $ 13.99 shipped with prime
brownells $21.94 shipped

[dkonrai]

Well thank you all for clearing that up.


Sent from my LG-M210 using Tapatalk

[RogerDat]

However the Lee 6 cavity handles will often fit other companies 1, 2, 3 & 4 cavity molds I use a couple of pairs of Lee 6 cavity handles for NOE and Lyman molds. So you can get a lot of use from the Lee 6 cavity handles.

I find it well worth my time to slip the wood handles off and put some JB Weld in the hole then put the handle back on. There is a tendency for the wood to slip off which can lead to dropping a mold. JB Weld can take the heat and solidly glues the wood handle to the metal. Nothing messes with a casting session like have the mold trying to drop off the handle.

[dkonrai]

Amazon as cheap. 13 bucks and change.

Sent from my LG-M210 using Tapatalk

[2011redrider]

here is a sticky from the molds section on cavity handles.
http://castboolits.gunloads.com/showthread.php?154184-Lee-6-Cavity-Handle-interchange-Use-list