View Full Version : Copper shim for gas checks.
JeffinNZ
07-21-2008, 12:29 AM
Team.
Would "High Conductive Copper 110, ETP Copper" be suitable for gas checks?
I want to try some but want an idea of how workable it is before I part with the minimum purchase of $50.
Buckshot
07-21-2008, 04:17 AM
Team.
Would "High Conductive Copper 110, ETP Copper" be suitable for gas checks?
I want to try some but want an idea of how workable it is before I part with the minimum purchase of $50.
Data for: Alloy copper C11000 (copper 110/ETP copper c110)
Includes: Ag
Design properties: Copper, ETP, Electrolytic Tough Pitch. Has conductivity 101% IACS. Ductile, anneal resistant.
Probably the most interesting for the purpose of making GC's: ..............
Hot Working: This alloy's capacity for being hot formed is rated as "excellent".
--------------------------------------------------------------------------------
Cold Working: The capacity for cold working this alloy is rated as "excellent".
--------------------------------------------------------------------------------
Annealing: The annealing temperature for this alloy is between 700 and 1200 F.
Info from: http://www.suppliersonline.com/propertypages/C11000.asp#Spec
...............Buckshot
JeffinNZ
07-21-2008, 05:57 AM
Knew I could count on the Buckshot dude. I am beginning to think of you as a guiding Guru father figure. :drinks:
runfiverun
07-21-2008, 01:07 PM
buckshot can find some info
and it is always accurate.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.