View Full Version : If you Have Ever Considered the 311291? Maybe You Should.
guicksylver
06-01-2017, 02:04 PM
I've had one version or another of this bullet for years..(forty or so)
I finally got serious about it..
Here are some of the results so for..http://www.artfulbullet.com/index.php?threads/noes-311291-in-the-308-winchester-showing-promise.2586/
Thumbcocker
06-01-2017, 08:34 PM
One of my favorietist boolits in anything .30 cal.
guicksylver
06-01-2017, 08:56 PM
It sure has turned my head around....
Think I'm going to give the old Lyman mold one more shot as well..
jimb16
06-01-2017, 09:41 PM
Been using that one for 40+ years.
John Boy
06-01-2017, 10:02 PM
Ideal 311291 - 28gr of 3031 = accurate to 500m. It is my pet Rife Caliber Lever Action match reload in a 30wcf Winchester 94
Another 30-30 or 308 bolt action bullet is the 411413 with 28gr of 3031 = accurate to 500m also
pworley1
06-01-2017, 11:25 PM
I use the Ideal 311291 for most all 30 cal loads as well. It is a great bullet.
Jack Stanley
06-02-2017, 07:36 PM
It's one that I use a lot . I sure can't complain about this one .
Jack
Kraschenbirn
06-02-2017, 09:16 PM
Gee...I always thought a 311291 was mandatory for any boolit caster owning a Krag, '03 Springfield, or Garand.
Bill
jimb16
06-03-2017, 11:45 AM
Seems to work moderately well in the .300 B.O. also, Only "problem" is seating depth.
Jack Stanley
06-03-2017, 10:52 PM
Mine is an old four cavity Lyman and it gets used for just about anything thirty caliber except the thirty carbine . I've got good result in the thirty Badger case with just a tiny bit of 700X to push it out .
Jack
44deerslayer
06-03-2017, 11:08 PM
Bin using it for 30plus years as well same as the rcbs 165 sil
guicksylver
06-04-2017, 01:58 PM
Well...DANG....guess I've lost out on 30+ years of fun shooting...(my fault just gave up too soon)...:killingpc
Jack Stanley
06-05-2017, 05:05 PM
Yes , well if you look for an older Lyman mold your chances are good at enjoying it . On the other hand I hear there are some good makers that Lyman quality doesn't come close to if you want a new mold .
Jack
guicksylver
06-06-2017, 08:42 AM
I think you have explained why this one from NOE works..as I said this mold cast a bullet with full .312 bands ,including the upper one ..it also cast a bullet with a .301 + nose...(with 4-4-92 alloy)
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.