RCBS Rapid Case Kicker system (auto ejector)

[Gunfreak25]

I am just a single stage kind of guy but even I get tired of manually picking the case out of the ram by hand. It's wasteful and time consuming. I thought there had to be a better way so I googled RCBS auto ejector because I knew someone else had come up with something simple, sure enough there is a product called a Rapid Case Kicker. Seller is on ebay. Got it installed today, best $30 spent in a very long time. I just resized 200 6.5 Swede cases in literally HALF the time. Bullet seating should go quicker too. Thought i'd share for single stager guys:

https://www.youtube.com/watch?v=wsxe3W1iLyk

[VHoward]

Get it from Inline Fabrication?

[VHoward]

Guess not. Good price for the one you got though. Here is the Inline Fabrication one. https://is.gd/RW1HQr

[sawinredneck]

Y I B! That's pretty dang slick.

[redriverhunter]

I got the rapid case kicker a couple of years ago, I could not image what it would be like with out it well worth the money
rrh

[Gunfreak25]

My press is on the inline fabrication press riser and I love it, but I couldnt justify their $60 tag for their auto case ejector although it is a little fancier.

[Taterhead]

That Inline Fab kit looks sweet. The paired bins are just like my Pro 2000.

Do any of you know how easy/difficult it is to get the kicker arm out of the way for instances where it is not needed, e.g. sizing boolits?

[Big Tom]

See below - the Inline Fabrication Case Ejector and the Rapid Case Kicker both work well on the RC IV/Supreme

[Big Tom]

I used the case kickers before and they work fine - I just did not like the price and integrated one into my primer catcher design. Still is work in progress and needs a better solution for the shute... and the rubber band is already replaced with a spring now :-)
212701 212702 212703


https://www.youtube.com/watch?v=XiDGCTQvdQg

[Jim_P]

That Inline Fab kit looks sweet. The paired bins are just like my Pro 2000.

Do any of you know how easy/difficult it is to get the kicker arm out of the way for instances where it is not needed, e.g. sizing boolits?

It just pushes back and out of the way. No problem at all.

One point about the Inline (yes, I have one) is it comes with the black plate you see in the pictures and has holes for dies as well as two baskets. One catches the case as it is ejected. The pusher is SS, and the ramp is AL with good velcro on the back to hold in place.