View Full Version : Took on a weird cartridge....Need a Lubrisizer die they don't make!
fatelvis
05-29-2017, 06:19 PM
I bought a cheap, unfired Ruger #1 in 9.3 X74R chambering. I'm buying NOE's 286grn mold, but for the life of me can't find a sizer die for my RCBS lubrisizer in .368" diameter. I don't think Lyman or RCBS make them in that size. Can anybody steer me in the right direction as to who carries or makes them? Thanks guys...
Yodogsandman
05-29-2017, 07:02 PM
Sign up for the next run of these here...
https://www.buffaloarms.com/368-custom-bullet-sizing-die-for-lyman-rcbs-lubrisizers-bac368
bessemer20
05-29-2017, 07:50 PM
I believe that lathesmith in the vendor section would also make you one.
Bzcraig
05-29-2017, 09:09 PM
Buckshot might make them too......
Beagle333
05-29-2017, 09:32 PM
Sadly...... Buckshot has retired and doesn't make dies or HP molds anymore.
JeffG
05-30-2017, 05:15 PM
I believe that lathesmith in the vendor section would also make you one.
This. Check with Lathesmith. He made a custom one for me, for 9mm Mak.
Cherokee
05-31-2017, 07:46 AM
I recommend Lathesmith.
fatelvis
05-31-2017, 10:57 AM
Lathesmith is on it. Thanks for the suggestion guys!
Sent from my iPhone using Tapatalk
fatelvis
06-10-2017, 01:52 PM
I just got my die from Lathesmith. Simply beautiful, It looks as if it rolled off of RCBS's production line! Thanks Lathesmith!
Oklahoma Rebel
06-10-2017, 02:25 PM
I am fixing to get a 9.3X62 in another month or so,hopefully, I am definetly smitten with the CZ550 FS (Full length Stock) so let me know how your loads go, I am planning on using h4895, starting at about 48grs with a 250 and a 285 gr RNFP GC accurate mold combo but these cartridges are slightly different, I'd have to look, but I think the 62 is a higher pressure cart. than the 74, though both will do the same thing.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.