Lee 195 and 41 magnum

[armexman]

Hola, anybody know if the Lee 410 195 is a new design?
I have an old TL designed 210 that has not worked well for me and would like to try this Boolit with Green Dot or Universal.
Gracias

[JonB_in_Glencoe]

I moved your post.

The 195gr isn't a new design, but it had been improved IMHO when Lee upgraded the design of their 2 cav blocks.
http://castboolits.gunloads.com/showthread.php?229698-Lee-410-195-SWC-new-style-good-news

I use 7.0gr Red dot

[HATCH]

I cast 220 grain magma mold.
I can send you a couple hundred if you pm me your address.

[osteodoc08]

Do you have the mold already or are you looking to buy a mold?

[LUCKYDAWG13]

I have the mold but not the tumble Lube design quite accurate with red.dot

[Good Cheer]

I use it in a 1858 Remington revised to .40 bore.
Lee sold it with spiral chatter marks on the sides of the SWC nose but I use it just the same.

196126

[Thekid]

I have the 41-195SWC I load it over unique.... it does the job!

[Larry Gibson]

The Lee 41-195-SWC is the original 41 mould from Lee. I was using it back in the '70s. Unfortunately I let the mould go when I traded off a M58. I use the TL41-175-SWC, the TL41-210-SWC, the RCBS 411-210-KT and a Lyman 410610 converted to PB in my Bisley Ruger.

The 41-195-SWC is an excellent 41 bullet......don't know why I haven't got another one.........probably because it's not available in a 6 cavity.......:-(

Larry Gibson

[armexman]

Doc, I have 6 41 molds;3 LBT, 2 Lyman and the old Lee.
The lee210 Sized .412 is not accurate, plus I want a lighter Boolit and thought someone has had good luck with this Boolit. I have over 2000 cast projectiles and shoot 210,220,250 and 265 trainers, I just want to not send so much lead down range

[Larry Gibson]

"The lee210 Sized .412 is not accurate"

What alloy?
What lube?
What load?

My Lee 210 is very accurate at low and medium 41 velocities.

Larry Gibson