PDA

View Full Version : Experiences with savage 220?



Buttonbuck
04-29-2017, 09:46 AM
Considering getting a savage 220 for the kids. I live in Illinois so no rifles for deer hunting. We have a scoped muzzle loader they can shoot on private land but a lot of the youth hunts are slug only. Has anyone developed a good accurate cast slug load I searched here and found none. I have a load worked up for the 20 gauge smoothbore using a roundball that is good out to 50 yd. I would like to use the 220 myself as well. My marlin 512 is great but a bear to hike with, great for the stand.

6pt-sika
04-29-2017, 12:23 PM
I've had a Savage 220 since they first came out . And have shotvdeer with it up to about 140 yards . I've used the Remington factory Accu-Tip 2 3/4" shells almost exclusively . I realize that's not what you ask but that's what I use .

Hogtamer
04-29-2017, 12:29 PM
http://www.furycustombullets.com

Uncle Dino vendor sponsor here and shotgun projectile genius. His plastic based slug has achieved 2" groups at 100 yds. Several threads herein including one with a neck shot at 88 yds.

bikerbeans
04-29-2017, 12:42 PM
b buck,

I just recieved a box of Uncle Dino's 20ga attached wad slugs and plan on doing load work very soon using Blue Dot. I believe Dennis shot his tight groups using Steel. I am using an H&R Tracker II, fully rifled slug gun.

I am with you on the 512. Look at the Fury website, there are some very interesting FB projectiles available for a fully rifled 12ga.

BB

mac60
04-30-2017, 10:02 AM
I helped my BIL get his going. It was uphill at first. The scope that came mounted on the gun was bad. Savage sent another - it was bad too. He bought a Nikon shotgun scope and after that it was smooth sailing. Using 3" Remington accu-tips it shoots very good at 100 yds. with some groups being 3 shots touching. The down side is that with that ammo, it's $3.00 every time you pull the trigger. He shot a big 'ol boar at 140 yds. and it was like the hammer of Thor.

Buttonbuck
05-02-2017, 11:46 AM
So no magic load with commercial mold? Like from a lee or Lyman?

LUCKYDAWG13
05-02-2017, 04:51 PM
Considering getting a savage 220 for the kids. I live in Illinois so no rifles for deer hunting. We have a scoped muzzle loader they can shoot on private land but a lot of the youth hunts are slug only. Has anyone developed a good accurate cast slug load I searched here and found none. I have a load worked up for the 20 gauge smoothbore using a roundball that is good out to 50 yd. I would like to use the 220 myself as well. My marlin 512 is great but a bear to hike with, great for the stand.
you can use muzzle loader in all of the IL deer hunts you are not restricted to shotguns even on state land
but you can only use a muzzle loader in the muzzle loader only season

OBCoal
05-02-2017, 05:03 PM
If you are wanting to reload for the 220, I would look at the SPW (SABOT PRESSURE WAD). I have had good results with them and are cheaper than factory loads (accutips). Round ball loads shoot good too using Trap commander wads in cheddite hulls, low recoil and fun to shoot. here is two loads I have used http://castboolits.gunloads.com/showthread.php?277186-More-20ga-round-ball

Buttonbuck
05-02-2017, 06:52 PM
So no good options using commercial moulds like Lyman or Lee 575 cal molds like the REAL or Minies. The 512 shoots the hornady SST and heck yeah on the Nikon shotgun scope with the BDC redicle. I bought their rifle scope for the muzzleloader. For real if I lived or hunted in another state I'd be using a rifle. The kids really like the renegade I use but the public land hunts really limit what guns we can use. The shots lately are 80-120 yards. It's weird. Of the 60+ deer I have taken in 23 years of hunting maybe 5 have been over 50 yards with the exception of archery.

Buttonbuck
05-02-2017, 06:57 PM
Nice RB groups. I use 19.6 gr herco in TC wad using fiochi hulls I use cards to bring 575 ball to the top of the wad. Good out to 40/50 yd with smoothbore IC choke 21" youth model 870