Clark
04-18-2017, 09:07 PM
193549
I took (6) old 98 Mauser cleaning rods and ground down the threaded end for an inch from 0.205" to 0.198" diameter to fit into the chrono holes.
I used a tapered punch and hammer and opened the cleaning patch slots in the rods to 0.205" .
I taped some butcher paper on top.
I cleaned the opto diodes with a Q-tip and alcohol.
Now it works again.
I took (6) old 98 Mauser cleaning rods and ground down the threaded end for an inch from 0.205" to 0.198" diameter to fit into the chrono holes.
I used a tapered punch and hammer and opened the cleaning patch slots in the rods to 0.205" .
I taped some butcher paper on top.
I cleaned the opto diodes with a Q-tip and alcohol.
Now it works again.