45 LC mold for tube magazine

[GARD72977]

Im looking at mold for a Taurus Thunderbolt. I know its not a leever but it feeds the same way.

Im wanting something that is a round nose style with a flat meplat. Hoping to to select a mold that will feed well. I also like the way they cut a large hole in paper.

I see that most of these styles do not have a crimp grove. I had rather taper crimp my lead bullets. Will it be a problem with a tube magazine?

[w5pv]

I shoot a Rossi 92 in a 45C and have no problems with the standard 255 grain lead round flat point. I cannot remember a malfunction ever.I think the length is 1.590 about .010" shorter than the 1.6 hope this helps and it is a lever gun.

[Harter66]

Any of the 452-4 - 255s should meet that requirement .

[Bzcraig]

This one is awesome in my Rossi

http://noebulletmolds.com/NV/product_info.php?cPath=41_161&products_id=747&osCsid=oiloa9ch8p5qv1qivlng1j65u3

[.45Cole]

454190/452190 is classic, 250grns. I use 230grns, 452374 Miha with the RN pin reversed for a 225grn RNFP

[CastingFool]

Both the Lee 452-200 RF and 255 RF feed well through my Henry BBS. Crimp groove is located the same distance from the nose, so the coal is the same for both loads.

[sandman228]

ive used the lee 200 and 255 rf molds without issues but prefer the tl 200 gr swc bullet in my rossi ranch hand and in my black hawk .

[Griff]

The RCBS .45-225-CAV is a truncated cone, and feeds well in all my 45 Colt leverguns.