iMigraine
04-04-2017, 10:17 PM
Got on that group buy for a "Slippery 9, Lee group buy of yesteryear." Had a couple of technical difficulties that were completely my fault. I.E. Didn't use a strong enough degreaser to clean the mould surfaces. Second, my cadence was way too slow and inconsistent. So, just wanted to show a comparison between the HTC358-133-RN vs Lee 356-125-2R for 9mm.
Photo of HTC358-133-RN in front of Lee 356-125-2R (https://www.flickr.com/photos/imigraine/33691032262/in/dateposted-public/)
Photo comparing them side by side (https://www.flickr.com/photos/imigraine/33691000692/in/dateposted-public/)
Eventually, I powder coat them and test them out on the range. I update my findings here.
Photo of HTC358-133-RN in front of Lee 356-125-2R (https://www.flickr.com/photos/imigraine/33691032262/in/dateposted-public/)
Photo comparing them side by side (https://www.flickr.com/photos/imigraine/33691000692/in/dateposted-public/)
Eventually, I powder coat them and test them out on the range. I update my findings here.