358 win bolt action?

[Hannibal]

Anybody own a .358 Win bolt action? Anyone shoot 10 shot groups? Any accuracy reports from you fellas?

Thanks. Lever guns, including BLRs need not apply. I had one and sent it on it's way.

[Reverend Al]

I custom rebuilt a 600 Remington into a neat little .358 Winchester carbine nearly a year ago. I had Ron Smith out in Alberta rebore the original .308 barrel out to .358 with a gain twist since it will mostly be shot with cast lead boolits and then put it into a Boyds grey pepper laminated thumbhole stock with a 2x7 Leupold. I'm embarrassed to say that I've only had it out to shoot it once so far and fire form some brass with a small variety of both jacketed and cast loads. It's sitting in my gun safe gathering dust and I haven't loaded any more ammo to test in it yet. (I obviously haven't shot it enough to settle on any favorite loads yet.) I really do need to get it out and play with it some more!

:roll:

http://i1221.photobucket.com/albums/dd466/Reverend_Al/Remington%20600%20358%20Winchester/Boyds%20pepper%20laminated%20thumbhole%20stock%203 58%20Win%20Remington%20600%20004%20Large_zpsxiutyb fr.jpg (http://s1221.photobucket.com/user/Reverend_Al/media/Remington%20600%20358%20Winchester/Boyds%20pepper%20laminated%20thumbhole%20stock%203 58%20Win%20Remington%20600%20004%20Large_zpsxiutyb fr.jpg.html)

http://i1221.photobucket.com/albums/dd466/Reverend_Al/Remington%20600%20358%20Winchester/Boyds%20pepper%20laminated%20thumbhole%20stock%203 58%20Win%20Remington%20600%20001%20Large_zpsdxiz6w ks.jpg (http://s1221.photobucket.com/user/Reverend_Al/media/Remington%20600%20358%20Winchester/Boyds%20pepper%20laminated%20thumbhole%20stock%203 58%20Win%20Remington%20600%20001%20Large_zpsdxiz6w ks.jpg.html)

http://i1221.photobucket.com/albums/dd466/Reverend_Al/Remington%20600%20358%20Winchester/Boyds%20pepper%20laminated%20thumbhole%20stock%203 58%20Win%20Remington%20600%20005%20Large_zpsay076x xq.jpg (http://s1221.photobucket.com/user/Reverend_Al/media/Remington%20600%20358%20Winchester/Boyds%20pepper%20laminated%20thumbhole%20stock%203 58%20Win%20Remington%20600%20005%20Large_zpsay076x xq.jpg.html)

[redriverhunter]

191903 here is a ten shot group at a hundred, the bullet was 200 gn Hornady round nose

[C. Latch]

I custom rebuilt a 600 Remington into a neat little .358 Winchester carbine nearly a year ago. I had Ron Smith out in Alberta rebore the original .308 barrel out to .358 with a gain twist since it will mostly be shot with cast lead boolits and then put it into a Boyds grey pepper laminated thumbhole stock with a 2x7 Leupold. I'm embarrassed to say that I've only had it out to shoot it once so far and fire form some brass with a small variety of both jacketed and cast loads. It's sitting in my gun safe gathering dust and I haven't loaded any more ammo to test in it yet. (I obviously haven't shot it enough to settle on any favorite loads yet.) I really do need to get it out and play with it some more!

:roll:

http://i1221.photobucket.com/albums/dd466/Reverend_Al/Remington%20600%20358%20Winchester/Boyds%20pepper%20laminated%20thumbhole%20stock%203 58%20Win%20Remington%20600%20004%20Large_zpsxiutyb fr.jpg (http://s1221.photobucket.com/user/Reverend_Al/media/Remington%20600%20358%20Winchester/Boyds%20pepper%20laminated%20thumbhole%20stock%203 58%20Win%20Remington%20600%20004%20Large_zpsxiutyb fr.jpg.html)

http://i1221.photobucket.com/albums/dd466/Reverend_Al/Remington%20600%20358%20Winchester/Boyds%20pepper%20laminated%20thumbhole%20stock%203 58%20Win%20Remington%20600%20001%20Large_zpsdxiz6w ks.jpg (http://s1221.photobucket.com/user/Reverend_Al/media/Remington%20600%20358%20Winchester/Boyds%20pepper%20laminated%20thumbhole%20stock%203 58%20Win%20Remington%20600%20001%20Large_zpsdxiz6w ks.jpg.html)

http://i1221.photobucket.com/albums/dd466/Reverend_Al/Remington%20600%20358%20Winchester/Boyds%20pepper%20laminated%20thumbhole%20stock%203 58%20Win%20Remington%20600%20005%20Large_zpsay076x xq.jpg (http://s1221.photobucket.com/user/Reverend_Al/media/Remington%20600%20358%20Winchester/Boyds%20pepper%20laminated%20thumbhole%20stock%203 58%20Win%20Remington%20600%20005%20Large_zpsay076x xq.jpg.html)

That's beautiful.

Who did the checkering? I have seen Boyd's stocks but didn't know they offered checkering.

[Reverend Al]

The checkering is an option through Boyds (laser cut from memory?) and I ordered it that way. Love the thumb hole stock ... I've always wanted to try one and I find this one very comfortable to shoot. I have another 600 Remington that is still in the factory stock that I rebarreled to .17 Remington Improved for varmint shooting and I like this Boyds stock enough that I think I'm going to order another similar stock for that rifle too. I'll likely order the 2nd one in a slightly different colour though just to change things up between the two guns ...

[MT Gianni]

I have an old Western Auto revelation that was rebored by JES. It does just fine with 200 gr RCBS.

[C. Latch]

The checkering is an option through Boyds (laser cut from memory?) and I ordered it that way. Love the thumb hole stock ... I've always wanted to try one and I find this one very comfortable to shoot. I have another 600 Remington that is still in the factory stock that I rebarreled to .17 Remington Improved for varmint shooting and I like this Boyds stock enough that I think I'm going to order another similar stock for that rifle too. I'll likely order the 2nd one in a slightly different colour though just to change things up between the two guns ...


Very nice!

[richmanpoorman]

Ruger 77s were available in 358 Win.

[JWFilips]

I have a Vanguard .308 that JES bored to 358 Win ( Bought it from a member here)
Ten shots 100yds
192045

[JHeath]

I wouldn't have a .358 bolt rifle because of their inherent inaccuracy. I've seen it happen. Guy takes a shot at the factory rifles forum with one of those .358s, and it keyholes clear over in "single shot rifles".

[Reverend Al]

I wouldn't have a .358 bolt rifle because of their inherent inaccuracy. I've seen it happen. Guy takes a shot at the factory rifles forum with one of those .358s, and it keyholes clear over in "single shot rifles".

http://i1221.photobucket.com/albums/dd466/Reverend_Al/Misc/ROFLMAO_zpsydmwdgys.gif (http://s1221.photobucket.com/user/Reverend_Al/media/Misc/ROFLMAO_zpsydmwdgys.gif.html)

[Bill*B]

Little Ruger Frontier gives me about 1 1/2" groups at 50 yards, with a 280 grain cast GC running just over 1700 fps. Of course that's with me behind the rifle. Who knows what it would do in the hands of a good shot.

[nekshot]

JHEATH - that is funny, a good laugh is good every now and then!!

[M.A.D]

Well they arnt a single shot, but the old Rem 788 in 358 Win was a nice rifle with great accuracy... But ive never come across a falling block in one....

[Texas by God]

Well they arnt a single shot, but the old Rem 788 in 358 Win was a nice rifle with great accuracy... But ive never come across a falling block in one....
The 788 was never chambered in .358 Win. Because I would have bought one.

[barrabruce]

Bloke at the range does/did have one.
Custom barrel fitted.
He seemed to have trouble with it.
Case separation.
Hammer the bolt open....broke bolt handle had to get another.
Recoil seemed severe with 250 grns cast bullets at 2200 fps.
Leading issues and then the paint sprayed bullets dried in his kitchen oven.
Recoil tamer pad for his shoulder and still knocked him about.

Best he could get out of it was about 1 1/2"-2" and at 100yrds.

Don't tell me he don't know what he was doing as he is the numero ono range officer and teachers lessons in reloading.
And has been casting for more than fifteen years.

OMG.:groner:

Sorry had to vent some pent up frustrations.

Don't think it was the gun nor the chambering at fault.
[smilie=1:

[Mike H]

Bloke at the range does/did have one.
Custom barrel fitted.
He seemed to have trouble with it.
Case separation.
Hammer the bolt open....broke bolt handle had to get another.
Recoil seemed severe with 250 grns cast bullets at 2200 fps.
Leading issues and then the paint sprayed bullets dried in his kitchen oven.
Recoil tamer pad for his shoulder and still knocked him about.

Best he could get out of it was about 1 1/2"-2" and at 100yrds.

Don't tell me he don't know what he was doing as he is the numero ono range officer and teachers lessons in reloading.
And has been casting for more than fifteen years.

OMG.:groner:

Sorry had to vent some pent up frustrations.

Don't think it was the gun nor the chambering at fault.
[smilie=1:
I wouldn't want this bloke giving reloading lessons near me.

[Texas by God]

I will try a ten shot group with my JES 700 and loads consisting of the 200gr RCBS, 37grs of 3031, lit by Win primers in reformed Hornady .308 brass. And let you know!
Best, Thomas.

[Texas by God]

I forgot to shoot ten shots last weekend but I put the 4 in the magazine into 3/4". This weekend was too windy to walk straight so didn't bother shooting. Cold, too!