jamesgpobog
03-25-2017, 10:55 PM
I'm not going to say how I got to this point, but I've been thinking that it might be better to expose stupidity rather than blow myself up.
Been making loads for the new T/C G2 13", .357MAXIMUM. Please help me find out if I've swerved off into the weeds and need to start looking for a bullet puller on Amazon.
THESE ARE UNPROVEN DEVELOPMENTAL LOADS, DO NOT USE THIS DATA.
Here's the loads, 10 rounds each.
.357 MAXIMUM
Missouri Boolit 140gr TC, Hy-Tek
IHMSA brass, nickel, once fired (?) (from the estate sale of an experienced shooter/reloader)
Unknown primers
9.2 gr Unique
Beartooth 180 gr WLNFPGC
IHMSA brass, nickel, once fired
Unknown primers
7.6 gr Unique
Western Boolit RCBS 35-200-FN GC HP
IHMSA brass, nickel, once fired
Unknown primers
13.5 gr AA#9
All informational feedback will be greatly appreciated.
Been making loads for the new T/C G2 13", .357MAXIMUM. Please help me find out if I've swerved off into the weeds and need to start looking for a bullet puller on Amazon.
THESE ARE UNPROVEN DEVELOPMENTAL LOADS, DO NOT USE THIS DATA.
Here's the loads, 10 rounds each.
.357 MAXIMUM
Missouri Boolit 140gr TC, Hy-Tek
IHMSA brass, nickel, once fired (?) (from the estate sale of an experienced shooter/reloader)
Unknown primers
9.2 gr Unique
Beartooth 180 gr WLNFPGC
IHMSA brass, nickel, once fired
Unknown primers
7.6 gr Unique
Western Boolit RCBS 35-200-FN GC HP
IHMSA brass, nickel, once fired
Unknown primers
13.5 gr AA#9
All informational feedback will be greatly appreciated.