kingstrider
03-25-2017, 09:10 AM
Well the purists will probably hate this but last year I bought a new Rossi 92 lever action for the sole purpose of legally converting it to a SBR, or short barrel rifle for those that are not into NFA stuff. I got the idea after seeing other lever action SBRs including those made by Grizzly Custom, the Chiappa Alaskan Scout and several Rossi Ranch Hands and Henry Mare’s Legs that people had converted using ATF Form 1 applications. This is intended primarily for plinking with a suppressor so from the beginning I knew that I wanted to use a .357 for my project since it is easy to tame when using subsonic .38 special ammo.
For months I deliberated the host gun and initially planned to use a JM stamped Marlin 1894C due to its fast 1:16 twist rate. This would have been ideal to stabilize heavier bullets but was eventually rejected due to cost. The Henry Big Boy was also eliminated from consideration because of the goofy loading tube that would interfere with using a silencer. I also considered using a Rossi Ranch Hand since it looks like an easy conversion, but others have done that before and I wanted something a little different.
In the end I decided to go with a Rossi 16” stainless carbine as the basis for my project since my other lever guns are stainless and because it will pair well with a natural titanium and stainless suppressor. For a detailed review of the gun as purchased see this link: http://www.marlinowners.com/forum/rossi-team-rossi/306185-project-stainless-rossi-92-357-magnum.html. After I bought the gun I found that Rossi actually sells a stainless 12” version in New Zealand. Granted it only comes in .44 magnum and is unavailable in the United States but this is initially what I had in mind for my build:
http://i159.photobucket.com/albums/t138/kingstrider/gun%20stuff/NFA%20stuff/Rossi%20SBR/Screen%20Shot%202017-03-19%20at%201.35.58%20PM.png
Prior to submitting paperwork to the ATF, my son and I took the gun to the range a few times to check for function. After all, there would be no sense in converting the gun if it didn’t work correctly. Using a variety of handloads with Lee TL358-158-SWC bullets, the little carbine proved to be reliable in feeding .357 and .38 special ammo but, most importantly, it was able to stabilize my subsonic loads out to 100 yards. Once satisfied, I finished my Form 1 application and sent it to the ATF, thus beginning the LONG wait...
http://i159.photobucket.com/albums/t138/kingstrider/gun%20stuff/NFA%20stuff/Rossi%20SBR/SAM_7634%20rev.jpg
For months I deliberated the host gun and initially planned to use a JM stamped Marlin 1894C due to its fast 1:16 twist rate. This would have been ideal to stabilize heavier bullets but was eventually rejected due to cost. The Henry Big Boy was also eliminated from consideration because of the goofy loading tube that would interfere with using a silencer. I also considered using a Rossi Ranch Hand since it looks like an easy conversion, but others have done that before and I wanted something a little different.
In the end I decided to go with a Rossi 16” stainless carbine as the basis for my project since my other lever guns are stainless and because it will pair well with a natural titanium and stainless suppressor. For a detailed review of the gun as purchased see this link: http://www.marlinowners.com/forum/rossi-team-rossi/306185-project-stainless-rossi-92-357-magnum.html. After I bought the gun I found that Rossi actually sells a stainless 12” version in New Zealand. Granted it only comes in .44 magnum and is unavailable in the United States but this is initially what I had in mind for my build:
http://i159.photobucket.com/albums/t138/kingstrider/gun%20stuff/NFA%20stuff/Rossi%20SBR/Screen%20Shot%202017-03-19%20at%201.35.58%20PM.png
Prior to submitting paperwork to the ATF, my son and I took the gun to the range a few times to check for function. After all, there would be no sense in converting the gun if it didn’t work correctly. Using a variety of handloads with Lee TL358-158-SWC bullets, the little carbine proved to be reliable in feeding .357 and .38 special ammo but, most importantly, it was able to stabilize my subsonic loads out to 100 yards. Once satisfied, I finished my Form 1 application and sent it to the ATF, thus beginning the LONG wait...
http://i159.photobucket.com/albums/t138/kingstrider/gun%20stuff/NFA%20stuff/Rossi%20SBR/SAM_7634%20rev.jpg