JeffinNZ
07-09-2008, 08:33 PM
Jim at CBE is sending me a double cavity test mould for trial for his new 238gr design. I am going to cast up some bullets and send them to him but of course cast equally as many for NZ trials.........[smilie=1:
Nominal .316 in groove, .303 on the nose, rounded flat nose design and bore riding. OAL 1.25. with bore riding section 0.8 from memory.
Should be great for hunting and for those FAT groove rifles.
More once it arrives.
Nominal .316 in groove, .303 on the nose, rounded flat nose design and bore riding. OAL 1.25. with bore riding section 0.8 from memory.
Should be great for hunting and for those FAT groove rifles.
More once it arrives.