PDA

View Full Version : Break apart


white eagle
03-22-2017, 03:59 PM
I have a Lee 4B mold and was wondering how do you all separate the shot from each other [smilie=b:
35Whelen
03-22-2017, 04:32 PM
I'd use a set of Dykes......side cutters that will cut very close to the ball.


Like these. http://www.glassstudiosupplies.co.uk/WebRoot/Store2/Shops/es137568/4D62/5701/84D5/429C/D47C/0A0F/110C/107C/LCP01.JPG
MusicMan
03-22-2017, 09:13 PM
Something like these might work better. https://www.amazon.com/Xcelite-170M-General-Shearcutter-Diagonal/dp/B0002BBZIS/ref=sr_1_2?ie=UTF8&qid=1490231438&sr=8-2&keywords=flush+cutter
35Whelen
03-22-2017, 10:49 PM
Something like these might work better. https://www.amazon.com/Xcelite-170M-General-Shearcutter-Diagonal/dp/B0002BBZIS/ref=sr_1_2?ie=UTF8&qid=1490231438&sr=8-2&keywords=flush+cutter

Thats the ones I use casting jigs and model making........