What is the thread pattern on a M38 Husqvarna carbine?

[TacticalGarand44]

I want to mount a silencer on my favorite milsurp. What is the thread pattern on this rifle? Is there a an available thread adapter which takes this pattern up to a 5/8x24, which is the standard 308 thread pattern, and the pattern of my silencer.

Thanks folks! I'm doing my best to learn from you guys. There is so much information here!

[Dutchman]

M14x1 RH

[TacticalGarand44]

Thanks. I ordered an adapter from CNC Warrior. I'll let you guys know how it turns out.

[Multigunner]

I've read that the threading for the blank shredder/adapter is often not concentric or in line with the bore.

If not perhaps the threading can be cleaned up before mounting a thread adapter.

[TacticalGarand44]

We'll find out. I ordered the adapter.
I've read that the threading for the blank shredder/adapter is often not concentric or in line with the bore.

If not perhaps the threading can be cleaned up before mounting a thread adapter.

[30calflash]

Would the length of the threaded portion be long enough for to support a can? It was meant for something that weighs a couple ounces, most likely.

[TacticalGarand44]

That is a possibility. The can weighs 13 ounces, so we'll see.
Would the length of the threaded portion be long enough for to support a can? It was meant for something that weighs a couple ounces, most likely.