Lyman 310 Swap thread - Feb 2017

[BrassMagnet]

I have the following available to swap. Anyone need one of these?

1. I have a #3 MR die.

Muzzle resizer for 22 WCF.

22 WCF is not 22 Hornet or 225 Win. It is 22 WCF.

See this thread:

http://www.assra.com/cgi-bin/yabb/YaBB.pl?num=1221705914

2. I have Priming Chamber #17

Priming Chamber #17 for 33 Winchester.


3. I have Priming Chamber #25

#25 is 41 Long

[Frogfeatures]

I have a 30-06 set that I'd like to swap for a 222 set.
picture attached

[ascast]

i have a spare 222 set do you need a pic? gimme a couple days. currently I have the flu or somthing

[Frogfeatures]

i have a spare 222 set do you need a pic? gimme a couple days. currently I have the flu or somthing

PM sent :p

[Green Frog]

I've gotten a hankering for a set of 44-40 dies for the 310 tool (like the two brand new, in the box sets I sold 10 years ago) to use with my Navy Arms/Uberti Henry rifle. I've got a "modern" set of 7/8X14 dies for it, but this caliber just screams out for some old fashioned tong tool reloading! Anybody got a set they want to swap?

Froggie

[BrassMagnet]

Let's keep this one going for March!

[dsh1106]

Here's my current want list.

338 win mag seating die (Lyman 310 die)

#468 Seating Screw for a Lyman 310 .270 Seating Die

30-40 MR Die (Lyman 310 die)

#4 shell adapter for the tong tool
#5 shell adapter for the tong tool

[Frogfeatures]

Teddy (punchie) - your message inbox is full
tried to PM you.

[BrassMagnet]

I have the following available to swap. Anyone need one of these?

1. I have a #3 MR die.

Muzzle resizer for 22 WCF.

22 WCF is not 22 Hornet or 225 Win. It is 22 WCF.

See this thread:

http://www.assra.com/cgi-bin/yabb/YaBB.pl?num=1221705914

2. I have Priming Chamber #17

Priming Chamber #17 for 33 Winchester.


3. I have Priming Chamber #25

#25 is 41 Long




Priming chamber #17 for 33 Winchester has been traded.

Priming chamber #25 has been traded. I still don't know what #21 and #27 are used for.

[bbogue1]

What is the difference between a shell holder and a shell adapter? Is the #2 shell adapter the style for a Tru line Jr?




Here's my current want list.

338 win mag seating die (Lyman 310 die)

#468 Seating Screw for a Lyman 310 .270 Seating Die

30-40 MR Die (Lyman 310 die)

#4 shell adapter for the tong tool
#5 shell adapter for the tong tool


I have:
- set of 270 Winchester 310 dies for the Tru-line Jr.
- #26 J shell holder
- #1 shell adapter
- #2 shell adapter
- 300 H&H" Bullet Seater, stem 366
- LYMAN J to X SHELL HOLDER ADAPTER - NEW

[Green Frog]

What is the difference between a shell holder and a shell adapter? Is the #2 shell adapter the style for a Tru line Jr?

I think the shell adaptor that he is referring to is the little threaded ring that screws into the hole of a set of 310 handles to adapt them to cases of different body diameters.

[dsh1106]

What is the difference between a shell holder and a shell adapter? Is the #2 shell adapter the style for a Tru line Jr?

The shell adapters are for the 310 Tong Handles, the shell holders are for the presses - TL Jr, AA Turret, Comet ....

[bbogue1]

So ... I have a friend that would like to learn to reload 45acp on a Tru Line Jr press. It takes a #2 shell holder, should he wish to use a tong tool he would need a #2 adapter AND a #2 shell holder? or just the adapter

[dsh1106]

Shell Holders are for the presses and Shell Adapters are for the Tong Tools.

For the 45 ACP you will need #2 "J" shell holder to fit the Tru-Line Jr Press. Just an FYI, for the 45 ACP you will need #7 shell adapter to fit the Tong Handle.

Scott

[buntingmiester]

Well I have a 310 for .375 H&H, but do not now anything about it , was a gift. My question is ,"Can I use this to also load .22 Hornet? " ....buntingmiester

[BrassMagnet]

Well I have a 310 for .375 H&H, but do not now anything about it , was a gift. My question is ,"Can I use this to also load .22 Hornet? " ....buntingmiester

No.
375 H&H uses Large handles and 22 Hornet uses Small handles.