View Full Version : 40 mm quston
flyingmonkey35
02-17-2017, 08:43 PM
I slugged my friends 40 today and we found that the grooves measure at .391.
This explains the leading we get when using cast.
I am having him call the gun manufacture as that's a bit nuts.
Sent from my LGLS991 using Tapatalk
kmrra
02-17-2017, 08:46 PM
Yep thats .01 a little too small huh , That just dont sound right to be that small
flyingmonkey35
02-17-2017, 08:49 PM
40 s&w. Sorry
. Shouldn't the barrel be .400
Sent from my LGLS991 using Tapatalk
kmrra
02-17-2017, 09:32 PM
Yes , the cast bullets that I cast , they are at .401 , so something is not right
nicholst55
02-17-2017, 09:55 PM
I was about to comment that .391" ID is a might small for a 40mm... :groner:
NavyVet1959
02-17-2017, 10:01 PM
I was about to comment that .391" ID is a might small for a 40mm... :groner:
Yep, that would be a pretty extreme bottleneck case. :)
wmitty
03-16-2017, 02:35 PM
We need to set up a category for Oerlikon and Bofors!
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.