jjnpg317
02-16-2017, 09:25 AM
I would like help in finding info on this boolit. I cast two hundred of them for use in a Ruger BH and a GP100 with powders H110, 2400, and A#9. The reloading manuals I have ( Lyman's /RCBS )are so old that the 327 is not even listed. I have used 2400 in 41, 44, & 45 but know nothing of it's use in a smaller caliber. H110 and A#9 are powders I have never used but were recommended by a fellow shooter.
I also bought a mold from Arsenal Molds that is 313631 for use in these revolvers, but again no info for this boolit either.
Barrel slugs at 312 and I can push both boolits through both their cylinders at 313 with slight resistance. Should I stay at 313 or go to 314 ?
Thanks
I also bought a mold from Arsenal Molds that is 313631 for use in these revolvers, but again no info for this boolit either.
Barrel slugs at 312 and I can push both boolits through both their cylinders at 313 with slight resistance. Should I stay at 313 or go to 314 ?
Thanks