View Full Version : Open Source Cartridge Drawings
T_McD
02-13-2017, 12:42 PM
Does anyone have or know where I can find open source cartridge drawings? I am compiling load data for eventual publication and would like to have cartridge drawings, but cannot/will not use ones with a copyright attached. The only thing I have stumbled upon was on Steve's Pages and those are used with permission and still under copyright.
Thanks, and please move if this is not the appropriate forum.
condorjohn
02-19-2017, 09:37 PM
stevespages.com/page7.htm Then scroll down near the bottom and click "other interesting stuff"
Paul24
02-20-2017, 08:52 AM
http://saami.org/specifications_and_information/publications/download/Z299-3_ANSI-SAAMI%20_CFPandR.pdf#page=10
Ask permission to publish when the time comes.
MostlyLeverGuns
02-20-2017, 10:34 AM
+1 Paul24
T_McD
02-22-2017, 12:04 PM
Thanks for the input. If I can't get open source, I will probably just leave them out. They were more to pretty it up anyways, cartridge dimensions are not overly useful to the average reloader IMO.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.