PDA

View Full Version : Dillon 550 Roller Handle


LongPoint
02-07-2017, 10:13 AM
======
VHoward
02-07-2017, 01:56 PM
https://inlinefabrication.com/collections/rcbs
Inline has several styles of roller handles to fit the rock chucker.

The handle for a Dillon 550/650 does not thread into the hole for the handle. It slips though and then has a nylock nut that screws onto the bottom.
rosewood
02-07-2017, 02:20 PM
The handle for a Dillon 550/650 does not thread into the hole for the handle. It slips though and then has a nylock nut that screws onto the bottom.

That doesn't mean the threads are not the same.
tstowater
02-07-2017, 02:48 PM
Just checked both an RC and an RCII and they are both .750 diameter. 550 handle is .625ish.

I would agree with the Inline Fabrication handles. Good stuff.



Sent from my XT1254 using Tapatalk
VHoward
02-07-2017, 03:26 PM
That doesn't mean the threads are not the same.
Quite a bit of the shaft that goes through the hole is not threaded. Just enought for the nut to tighten the handle into place.
XDROB
02-07-2017, 04:58 PM
I have the Inline on my Hornaday LnL. Love it.

Sent from my SM-N920V using Tapatalk