Is nobody looking at the 310 Swap sticky or doesn't anyone need what I posted?

[BrassMagnet]

Is nobody looking at the 310 Swap sticky or doesn't anyone need what I posted?

1. I have a #3 MR die.

Muzzle resizer for 22 WCF.

22 WCF is not 22 Hornet or 225 Win. It is 22 WCF.

See this thread:

http://www.assra.com/cgi-bin/yabb/Ya...num=1221705914 (http://www.assra.com/cgi-bin/yabb/YaBB.pl?num=1221705914)

2. I have Priming Chamber #17

Priming Chamber #17 for 33 Winchester.


3. I have Priming Chambers #21, #25, & #27

#25 is 41 Long

What is #21 for?

What is #27 for?

[georgerkahn]

Sorry, Mr. Magnet! I always check/read your postings :)! But, sadly a poor, retired chap -- I have nothing in my wee collection which might use the wonderful items you posted; and, am ignorant enough to not even know what a priming chamber is. (I may just Google it... you piqued my curiosity...)
So, to respond to your query -- YES, I looked; and NO, I have no need.
BEST!
geo

Later edit -- I Googled priming chamber, and best I can find: "On the inside of a cylindrical envelope, an anvil projects from the base of the envelope and has a flat central member extending parallel to an axial plane of the envelope. Flash-holes are formed in the flat areas of the base on either side of the central member so as to create passages in the vicinity of the axial plane of the cylindrical envelope. The central member has two extensions which have a tapered upper portion and connect to the top of the flat central member, forming a relatively flat end, the lower part of the anvil being connected to the cylindrical envelope, forming an integral part of it."
This makes no sense to me! This sounds more like the description of a primer. ???????
geo

[Green Frog]

Geo, the priming chamber is the part Lyman provides with the 310 tool set of dies to re-prime the case... it's the odd part that looks like about half of it is cut away.

For everyone reading this, the journey down 310 TL Jr road is a strange and marvelous one and it's vital that you have a source of odd parts as you follow the twists and turns. There are only a few such sources and I can highly recommend my e-friend, Brass Magnet. Although we are half a country apart, I have repeatedly packed up a batch of trade stuff and shipped it to him, and the return mail never failed to satisfy. For Mr Magnet, it seems that the stranger the better as far as calibers are concerned! I look to him first when I need to look for 310 stuff. :coffeecom

Regards,
Froggie

[Bent Ramrod]

I posted what I had and needed in another thread, which drifted around inconsequentially and then died. I figured if anyone was interested, they'd get in touch.

The 310 Swapping Thread idea sounded good in theory, but it looks like Swapping & Selling is a more productive venue.

[Wayne Smith]

Since I found that the 310 41Colt set is designed for the inside boolit, not the heeled, I gave up on that caliber with the 310 - too bad, it's a natural. The Starline brass for this caliber uses the 38 Special shell holder anyway. Lot of confusion and complications with the 41Colt cartridges.

That is the only one on your list I load, and I'm at work so don't have my listing for the others.

[georgerkahn]

Thank you for explanation, Green Frog! I'd never have guessed what it was -- as stated Google provided no correct answer -- and albeit I am an afficiando and user of the Lee Factory Crimp dies -- that's about all ('cept two moulds) I have of Lee stuff.
I appreciate your taking the time to explain this; I, too, concur with your kudos for Mr. Magnet ;)!
geo

[jrmartin1964]

3. I have Priming Chambers #21, #25, & #27

#25 is 41 Long

What is #21 for?

What is #27 for?

Based on 310 Priming Chamber numbers generally aligning with TruLine Jr. shell holder numbers:
PC No.21 - .38 Smith & Wesson
PC No.27 - 6.5x55mm Swedish Mauser

[John Boy]

Is nobody looking at the 310 Swap sticky or doesn't anyone need what I posted?Nothing needed. If your so concerned about not selling the items - post in the For Sale on the ASSRA forum

[Eddie Southgate]

Brass,
I tried to locate info on the #27 and # 21 priming chambers in my older Ideal books and blanked on both . The # 21 J shell holder is for the .38 S&W Long according to the 310 die chart in the Lyman 41 st edition load book . Most pc's are the same # as the J shell holder for a given caliber but that is not true in all cases . The .30 carbine uses a pc #23 but uses a J shell holder # 19 and the .32 Auto/ .32 S&W Long pc # is 9 but uses a # 19 J shell holder . The 7.62 Russian uses a pc #16 and a J # 17. Most of the others listed are the same number from one type to the other , problem is they made a lot of sets that are not listed . I have not seen a complete list published by Lyman with all the sets they ever made as regular production listed .

Eddie

[Char-Gar]

I have a 38 S&W boxed set and it came with the #1 priming die, same as 38/357. It works fine for both cases.

[Frogfeatures]

I have a 6 die 30/06 set that I have no need for. ( With handles ) Still looking for a 222 set though
anyone want to swop ?




Sorry for the hijack, Mr Magnet !

[Wayne Smith]

No hijack, that's exactly what Brass wants.

[Eddie Southgate]

I have a 38 S&W boxed set and it came with the #1 priming die, same as 38/357. It works fine for both cases.


That does not surprise me.There are probably several that would cross over.The S&W and Special have the same rim size and case diameter so there would be no reason for it not to work for both.Maybe the #1 and #21 is the same deal as a #9 and #19 ? They use a #14 priming chamber for the .45 Auto Rim as well as the 38-40 and the 44-40 . Rim diameter of all three may be near enough to work but the Auto rim has a rim that is much thicker but according to Lyman it works . In a J holder the AR takes a #14A and the 38-40 and 44-40 take the #14B .

Eddie

[BrassMagnet]

Based on 310 Priming Chamber numbers generally aligning with TruLine Jr. shell holder numbers:
PC No.21 - .38 Smith & Wesson
PC No.27 - 6.5x55mm Swedish Mauser


Thanks for the info!
It looks like I need PC No.21 and PC No.27!

[BrassMagnet]

[/h]Nothing needed. If your so concerned about not selling the items - post in the For Sale on the ASSRA forum

I never sell.

[JonB_in_Glencoe]

Is nobody looking at the 310 Swap sticky or doesn't anyone need what I posted?

...SNIP
I'm not sure why? but making a thread into a Sticky seems to be the best way to kill a thread :veryconfu

[bedbugbilly]

I havent checked it in a long time. The last time I did, it seemed so discombobulated that it was somewhat hard to follow. As said, it seems like the WTS/WTS section would be a little more effective - not so much for selling but for swapping.

[BrassMagnet]

I havent checked it in a long time. The last time I did, it seemed so discombobulated that it was somewhat hard to follow. As said, it seems like the WTS/WTS section would be a little more effective - not so much for selling but for swapping.

Let's make a 310 Swap thread right here and lock it every few months so it has to start over with current information.

[Frogfeatures]

Let's make a 310 Swap thread right here and lock it every few months so it has to start over with current information.

Good idea !

[BrassMagnet]

Let's make a 310 Swap thread right here and lock it every few months so it has to start over with current information.

Lyman 310 Swap thread for February 2017 started. Go ahead and jump in. The water is fine!

[woody1]

In case it hasn't been posted already, the #17 priming chamber also fits the 45-70 & 45-90 and anything else 45-70 based.

[Teddy (punchie)]

Any one looking for a complete set of 300 Winchester Mag (no handles) ? Have box and I'll double check and make sure it all there. I'll let the FL steel lyman resizer go with it. Last buddy just sold his 300 Win Mag. and I'm not going to hold on to this one. Box is in great shape. I'll be going over my sets and add to more things to trade in the next few days.


Somethings off the top of my head.

In 44-40 set I need a few things. Or an ideal tool for the 44-40

Couple of adapters in sizes to fit the 44 mag.

I'll have a list of things I need and to trade I'll up date soon. So bear with me.

[Teddy (punchie)]

I have a 6 die 30/06 set that I have no need for. ( With handles ) Still looking for a 222 set though
anyone want to swop ?




Sorry for the hijack, Mr Magnet !

What do you need for a 222 set??

[dsh1106]

Here's my current want list.

338 win mag seating die (Lyman 310 die)

#468 Seating Screw for a Lyman 310 .270 Seating Die

30-40 MR Die (Lyman 310 die)

#4 shell adapter for the tong tool
#5 shell adapter for the tong tool


I have set of 310 dies for 270 (less the priming chamber) to trade, comes with #2 adapter for the handle.

Scott

[Frogfeatures]

What do you need for a 222 set??

Everything !

[Teddy (punchie)]

Everything !

Well I have a set made up, Frogfeatures.

Sent at you a PM

[Frogfeatures]

Well I have a set made up, Frogfeatures.

Sent at you a PM
thanks, reply on its way