H&G 68 BB eight cavity!

[TexasGrunt]

There's an H&G 68 BB eight cavity mold on eBay right now. It appears to be brand new.

It's way to rich for me but I thought someone might be interested.

[oger]

The eight cavity can be a little hard to use I would suggest a four cavity unless you are a collector.

[ioon44]

For me a 4 cav Lyman turned out to be heaver than I want to cast with, I have been spoiled by Aluminum molds.

[sagamore-one]

I actually find it less tiring using 8 cavity. I normally run a pair of 8's . Work the first one while the other is setting up. Elevated flat surface used to scoot/ slide moulds around. Lead hammer to open sprue plate.

[M-Tecs]

I actually find it less tiring using 8 cavity. I normally run a pair of 8's . Work the first one while the other is setting up. Elevated flat surface used to scoot/ slide moulds around. Lead hammer to open sprue plate.

Same for me. I only have a couple of 8's but I have six 10 cavity H&G's.