Broke my 450 luberasizer

[sutherpride59]

So while adding lube pressure today on my old Lyman 450 the hex bob snapped clean off I assume due to age. I was using a soft lube for 45 boolits and I use a wratcheting screwdriver so I know I didn't turn it too hard especially cuz lube would be everywhere when I do. Any idea how to fix this without a welder? I emailed Lyman but I doubt they can help. Any ideas would be appreciated. Thanks in advance fellas.

[Pavogrande]

where did it break? can you photo?

[6bg6ga]

Sell it for parts and purchase a Star or Magma sizer.

[Pressman]

Lyman can help. They sell the bolt and pressure washer as an assembly and it's not costly. Get on their website to find the part number then call them.
Ken

[retread]

Pressman is right on. I replaced mine last year. The hex was wearing on the bolt. It was around $7 as I recall. Fast delivery.

[sutherpride59]

Pressman is right on. I replaced mine last year. The hex was wearing on the bolt. It was around $7 as I recall. Fast delivery.

Awesome, I don't have any pics at the moment but that is the part that broke, the rod with a hex head and it sheared off right at the end of the hex part.

[sutherpride59]

184742Found it number 9! I'll order it today. Thanks guys.

[JonB_in_Glencoe]

item 9 "Pressure screw"
http://www.lymanproducts.com/store/page151.html