PDA

View Full Version : powder funnel/trickler or what?



max it
12-19-2016, 11:03 AM
hi Ya All,
I have 2 1/2 # of H322 to use up. And I reload rifle in my Dillon RL450. It bridges! So I want to hand fill some cases.
what do I need minimally? I will never buy stick powder again for this, now 2230 ball works better.
much obliged,

Max

dverna
12-19-2016, 04:40 PM
Make up a scoop for a bit under your desired charge weight.
Scoop powder into the scale pan.
Use a trickler to bring the charge weight up to specification.
Dump into case.

Don Verna

max it
12-19-2016, 04:47 PM
Hi Don,
thanks however at the range this AM one guy said to just get a $21.00 powder measure. I think I will try that first.
much obliged, Max

pull the trigger
12-19-2016, 08:29 PM
Make up a scoop for a bit under your desired charge weight.
Scoop powder into the scale pan.
Use a trickler to bring the charge weight up to specification.
Dump into case.

Don Verna
Do this. Dont buy a crappy measure to do what your good one won't

max it
12-19-2016, 09:04 PM
Do this. Dont buy a crappy measure to do what your good one won't
Gotcha
much obliged

runfiverun
12-20-2016, 01:07 AM
your 450 needs more jiggling.
I love H-322 it runs through the 550 just fine, and is more accurate in some loads than the 2230 is.

max it
12-20-2016, 09:52 AM
For a long while I forgot my membership in cast boolits. But you guys are the best. Aw shucks.
Mr. Five. ? What jiggling?
much obliged. Max.

ulav8r
12-20-2016, 03:18 PM
As you stroke the handle on your measure, go to full stop, then back it off 1/2" then tap it back to full stop 2 times. That will get more consistent filling and complete emptying of the measure.