FrontierMuzzleloading
12-03-2016, 05:51 PM
A really nice day, snow on the ground, no wind, nice heat from the sun, yet cool from the snow, just a really perfect day to shoot.
I loaded up the Traditions Mountain Rifle .50cal flinter and headed over to my 50 yard range to experiment a little.
I used my standard load of 70gr Olde Eynsford 2fg, .015" patches lubed with Buckskinner's lube, .490" round ball and French Amber flints. For Pan Powder, I used 2fg Olde Eynsford to see how well it did.
After experimenting with the 2fg pan charge, I found it likes 2 dribbles of powder from the pan charger horn. I am having trouble with powder sticking inside the horn and giving me issues with it dispensing a consistent amount from one press to the other, so I am going to find my other brass charger and see if that does better. The horn seems to stop up the powder unless I shake it around.
https://i37.servimg.com/u/f37/19/04/51/92/img_8221.jpg (https://servimg.com/view/19045192/372)
Hundreds of strikes on the MR's frizzen and just a little marking where the flint first comes into contact. This actually isn't even dug in other on the right hand corner when A flint broke and the edge really got it. Still not deep though. This lock sparks like the 4th of July.
https://i37.servimg.com/u/f37/19/04/51/92/img_8222.jpg (https://servimg.com/view/19045192/373)
Sadly I lost this flint while shooting! I think my leather was to short and wasn't holding it as well as it should. I went in and cut a new one and replaced the flint. Hopefully I can find it once the snow melts off a bit.
https://i37.servimg.com/u/f37/19/04/51/92/img_8223.jpg (https://servimg.com/view/19045192/374)
Next I switched back to 4fg Goex and will stick with it, its just a lot easier to deal with and I feel more comfortable.
Normal pan charge amount for both of my Traditions flintlocks.
https://i37.servimg.com/u/f37/19/04/51/92/img_8310.jpg (https://servimg.com/view/19045192/375)
I also tried using just 1 push on my powder pan charger and this amount wasn't enough to fire consistently. It lagged quite a bit VS the charge above. Use what your rifle tells you to use!
https://i37.servimg.com/u/f37/19/04/51/92/img_8311.jpg (https://servimg.com/view/19045192/376)
I'll have a video up later once I put it together, just the rifle going off while I was shooting. I like to examine the video for anything thats going on. Just a whole lot of flinching as the rifle booms :D :D
I loaded up the Traditions Mountain Rifle .50cal flinter and headed over to my 50 yard range to experiment a little.
I used my standard load of 70gr Olde Eynsford 2fg, .015" patches lubed with Buckskinner's lube, .490" round ball and French Amber flints. For Pan Powder, I used 2fg Olde Eynsford to see how well it did.
After experimenting with the 2fg pan charge, I found it likes 2 dribbles of powder from the pan charger horn. I am having trouble with powder sticking inside the horn and giving me issues with it dispensing a consistent amount from one press to the other, so I am going to find my other brass charger and see if that does better. The horn seems to stop up the powder unless I shake it around.
https://i37.servimg.com/u/f37/19/04/51/92/img_8221.jpg (https://servimg.com/view/19045192/372)
Hundreds of strikes on the MR's frizzen and just a little marking where the flint first comes into contact. This actually isn't even dug in other on the right hand corner when A flint broke and the edge really got it. Still not deep though. This lock sparks like the 4th of July.
https://i37.servimg.com/u/f37/19/04/51/92/img_8222.jpg (https://servimg.com/view/19045192/373)
Sadly I lost this flint while shooting! I think my leather was to short and wasn't holding it as well as it should. I went in and cut a new one and replaced the flint. Hopefully I can find it once the snow melts off a bit.
https://i37.servimg.com/u/f37/19/04/51/92/img_8223.jpg (https://servimg.com/view/19045192/374)
Next I switched back to 4fg Goex and will stick with it, its just a lot easier to deal with and I feel more comfortable.
Normal pan charge amount for both of my Traditions flintlocks.
https://i37.servimg.com/u/f37/19/04/51/92/img_8310.jpg (https://servimg.com/view/19045192/375)
I also tried using just 1 push on my powder pan charger and this amount wasn't enough to fire consistently. It lagged quite a bit VS the charge above. Use what your rifle tells you to use!
https://i37.servimg.com/u/f37/19/04/51/92/img_8311.jpg (https://servimg.com/view/19045192/376)
I'll have a video up later once I put it together, just the rifle going off while I was shooting. I like to examine the video for anything thats going on. Just a whole lot of flinching as the rifle booms :D :D