Michael J. Spangler
11-05-2016, 03:58 PM
I know the first 2 are reloading dies.... one is marked 38 and the other has no markings. What type of press would these have been use in? One appears to have a carbide sizing ring and the other does not.
These were all in the bottom of a box of moulds and random screws and nuts and some loaded 38 wadcutters.
Is the plate with holes some type of sizing plate? the holes all appear very uniform and have radiuses edges. I know the old ballisti cast sizer had some type of similar sizing plate.
There was a magma style mould in there with a couple extra sprue plates.... I'm sure all of this came from a commercial reloading and casting company that is long since gone.
Thanks for the help guys!
http://i286.photobucket.com/albums/ll105/MJSpangler/Casting/1224F036-77D9-4314-BA9A-C6854F9570E5_zpsglyu1y9z.jpg (http://s286.photobucket.com/user/MJSpangler/media/Casting/1224F036-77D9-4314-BA9A-C6854F9570E5_zpsglyu1y9z.jpg.html)
These were all in the bottom of a box of moulds and random screws and nuts and some loaded 38 wadcutters.
Is the plate with holes some type of sizing plate? the holes all appear very uniform and have radiuses edges. I know the old ballisti cast sizer had some type of similar sizing plate.
There was a magma style mould in there with a couple extra sprue plates.... I'm sure all of this came from a commercial reloading and casting company that is long since gone.
Thanks for the help guys!
http://i286.photobucket.com/albums/ll105/MJSpangler/Casting/1224F036-77D9-4314-BA9A-C6854F9570E5_zpsglyu1y9z.jpg (http://s286.photobucket.com/user/MJSpangler/media/Casting/1224F036-77D9-4314-BA9A-C6854F9570E5_zpsglyu1y9z.jpg.html)