PDA

View Full Version : New source of 218 Bee Brass



dale2242
11-02-2016, 10:58 AM
Hornady is now loading 218 Bee Ammo.
I don`t see brass listed yet.
Good news for shooters seeking 218 Bee brass.....dale

http://www.hornady.com/store/218-Bee-45-gr-HP-Custom/

Thin Man
11-03-2016, 10:21 AM
Happy days! Now, for the same cost as inter-web used brass, one can buy loaded ammo. Bargain!

Thin Man

Soundguy
11-03-2016, 10:43 AM
Is winchester ( silver box ) still being made in the 1/year runs?

I bought some as recently as 2 years ago maybee. It's not surperb brass, but it works. about 5% neck splits.

Jeff Michel
11-03-2016, 10:59 AM
46.75 for 25 rounds?

smokeywolf
11-03-2016, 11:10 AM
OUCH! Two bucks a pop. But, with the shortage of brass, both in the reloading market and in my shop, I'm tempted.

elk hunter
11-03-2016, 11:36 AM
46.75 for 25 rounds?

Yup! that's $1.87 per round but still better than no ammunition available at all for people with guns but no ammo. As for me I'll just keep reloading for my Bee.

country gent
11-03-2016, 12:01 PM
I have 300 cases for my bee all winchester. watching how you size makes a big diffrence in case life as do the loadings. Ive used Hornady brass in other calibers and it was good consistant brass with decent wall thickness and weight variations were low. Id expect the same from the 218 bee brass. 22 hornet 218bee along with some others is going to be harder and harder to find in the future

Soundguy
11-03-2016, 12:08 PM
The Winchester silver box I shoot averages about 5% neck splits I virgin brass.

I have 60's vintage REM CB brass I'm working thru slowly, with many reloadings on it.

Intel6
11-04-2016, 04:47 PM
I had to wait a while to get some new brass for my .218 Mashburn Bee but Winchester finally made a batch and I got 500 so I won't need any for a while!

I looked at the link and they list the unloaded brass now, looks to be $1 a piece.

Soundguy
11-04-2016, 04:59 PM
Ouch!

Skipper
11-04-2016, 05:28 PM
http://www.assra.com/cgi-bin/yabb/YaBB.pl?num=1478210252/0

Soundguy
11-04-2016, 05:37 PM
At least its NOS

Reverend Al
11-04-2016, 06:58 PM
Now if I could only just find some .25-20 WCF brass up here in Canada!

:-(

country gent
11-04-2016, 08:14 PM
Keep in mind most bpcr specialty brass is that much or more a piece if it can be found. It is an investment and handled properly will last a long time

Soundguy
11-04-2016, 08:36 PM
If the necks weren't so paper thin, even longer.

smokeywolf
11-04-2016, 11:26 PM
http://www.assra.com/cgi-bin/yabb/YaBB.pl?num=1478210252/0

I'm banned from that forum because I use a secure and anonymous browser.

OptimusPanda
11-05-2016, 11:18 PM
The last box of 50 winchester 218 I picked up ran $80. Maybe 4 years ago? This sounds about in line with that.

nhdon
05-06-2019, 05:06 PM
Picked up 7 boxes 218 bee hornaday brass (350 rnds) for under $25 each early this year out of Midway. ff to m bee 0 failures so far did uniform flash hole. Added them to 200 rnds picked about 1 year early at $35 a box at lgs. They go quick. Have a nice day Don K

nhdon
05-06-2019, 05:15 PM
Anybody Know how many Mashburn 218 bees were by Kimber?? Thanks Don K