Powder at Bartlett's. WC844 in short supply

[Buckshot]

.............I was at Bartlett's this evening and ordered 24 lbs of SR4759. Noticed he didn't have any WC846 and only has 200 lbs of WC844 left. Don't know how much SR4759 he has left and was surprised he still had any after how fast it went last time.

I only got 2 jugs last time and am down to one. Shipping and haz mat to Kaliforny put it at about $10.15/lb delivered. A bargain.

But Hunny bunny I saved us $240 over the store price! Heavy on the 'US' part!

..............Buckshot

[RayinNH]

Buckshot, Pat's Reloading has WC846 if your in need :D. The problem with these dealers is they never have all the powders that you want, and it's not cost effective to buy one here and two there...Ray

[Buckshot]

Buckshot, Pat's Reloading has WC846 if your in need :D. The problem with these dealers is they never have all the powders that you want, and it's not cost effective to buy one here and two there...Ray

...........Very true, so save up some more and buy 4 here and 6 there!:D. Get together with a few guys and there ya go.

..............Buckshot

[PatMarlin]

Buckshot,

You also mentioned a 4895 lot was running low at Barlett's. I just bought some from Hi-tech. Was the Bartletts lot better?

I got some 820, 4895, and 872. Seemed to cover most of my shootin' irons pretty darn well.

Wouldn't 4895 and 844 be pretty close?

[Buckshot]

Buckshot,

You also mentioned a 4895 lot was running low at Barlett's. I just bought some from Hi-tech. Was the Bartletts lot better?

I got some 820, 4895, and 872. Seemed to cover most of my shootin' irons pretty darn well.

Wouldn't 4895 and 844 be pretty close?

I'm sure Bartlett's and Dan's 4895 came from the same batch. I like the extruded powder a bit more for reduced loads then the ball. Although I shoot some REALLY reduced loads with WC872 & WC860, and they're ball powders. Go figure :D

............Buckshot