View Full Version : Martini International MK II
Calamity Jake
10-26-2016, 03:58 PM
Any one have or know of a good video for take down and cleaning of this wonderful firearm?
You tube doesn't have much.
knewmans
10-26-2016, 04:57 PM
How far do you need to dismantle it?
The action will just drop out if you remove the large screw on the right. There is a picture of a dismantled Mk II near the bottom of this page http://www.rifleman.org.uk/BSA-International_MksI_and_II.html. The hole at the back of the action allows a clear path for a cleaning rod to the breech.
Calamity Jake
10-26-2016, 05:48 PM
Lots of good info there. Thanks
akajun
10-28-2016, 08:28 AM
Don't need much maintaining, just take the tigger assembly out and use a light oil on it sparingly. Clean the bore from the rear, and make sure to put a drop of oil on the extractor/ ejector once a year.
Calamity Jake
11-02-2016, 03:31 PM
OK will do, thanks.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.