revolver loading blocks

[shotguneddy]

I was just curious how many revolver shooters use those loading blocks I've seen available on the internet and what they thought of them.

[shotguneddy]

It appears that no one has any input on this thread. I'm wondering if I should go into production or not.

[shotguneddy]

I'm going to make a video of my unit in action and post it on youtube....maybe.

[454PB]

I've got dozens of them, mostly plastic. About 35 years ago, I bought some that have 60 holes instead of 50. I like them best because it allows a couple of empty rows between the cases that have been primed/charged/flared and the ones that haven't.

When I bought my 45/70, I had to make my own loading blocks, none of the available commercial ones had big enough holes. I use 2X8 lumber and set up a spade bit on a drill press. Add a guide for spacing and alignment, set the depth stop, and drill away. I sold the 45/70, but still have the home made loading blocks.

[Lucky Joe]

Sorry Ed this is the first time I've seen your post. I have an Ruger Old Army I haven't fired yet, and did spend a little time wondering if a loading block was something I should consider. Let me know if and when you post your video.

[shotguneddy]

I made my first prototype specifically for the "Old Army", but with a little modification it can be used with just about any of 'em. I have materials coming this week to make a limited run of 5 units. I did film a video this afternoon, but the lighting wasn't that great and I need to change the camera angle a little. I've used the "pivot and pendulum" type loader which prompted me to rethink the process.

[AzShooter]

I've built a few for myself and a friend. It really helps to hold the revolver steady when loading it. I never could load with everything in my hands. I copied the dementions from the BPCR.com board, used Monkey Wood and like the way they came out.

[shotguneddy]

the type I'm referring to are the ones that you must remove the cylinder from the frame to load.

[shotguneddy]

I posted the first video I recorded on youtube, although it really is of poor quality. I will make a better video and post it later today.

http://www.youtube.com/watch?v=iem7LaCAhUs

[garandsrus]

Shotguneddy,

Looks nice... How much are you selling a ROA version for?

Thanks,
John

[shotguneddy]

Would you want the wad cutting attachment with that or just the loader?

[shotguneddy]

I've added a video on my youtube that demonstrates the wad cutting mode of the loading tool.

http://youtube.com/watch?v=sefuGhu3Vfo&feature=user

[garandsrus]

You might as well provide prices each way as someone is going to ask...

Thanks,
John

[shotguneddy]

I'm using high quality materials in it's construction. 6061 aircraft quality aluminum, 1045 high carbon steel, 4140 chromoly steel. I'm a toolmaker and wanted to build a tool that will last. $75 for just the loader, $25 for the wad cutting attachment.