128gr round nose wadcutter

[aw93]

Hi anyone that have seen a mold for a 128gr round nose wadcutter that dropps .357/.358?

I have attached a picture, its bullet number 3 from left in blue.

175787

I would like get 2 4 cav molds for that bullet

[Forrest r]

That bullet looks like the large bottom banded (130gr) himmerwright bullet. Lyman made a 112gr version 358302 also.

Mountain bullet molds might be a place to start.

http://www.mountainmolds.com/

[Maven]

aw 93, Take a look at this: http://www.lasc.us/Fryxell_Book_Chapter_11_Wadcutter.htm

[Guesser]

I have the 360302; that was before it was redesigned the 358302 listed above. Mine drops .361 cast soft and will go 115+ grains when sized & loobed. Haven't used it a lot but I load it in 38 S&W for S&W & Colt. Seems to be OK.

[dverna]

Thanks for the link Maven. I saw my first mold in the write up. H&G 10 cavity #50 BB. It sure brought back memories. That monster would cast about 1000 bullets an hour.