310 MiHec 308 hunting Bullet

[sfcairborne]

Does anyone know a good load for this Bullet in the 300 Blkout? My Honady manual list loads for the 150 grain but I would like to reduce the Fps to 1200-1500. Thanks guys.

http://i67.photobucket.com/albums/h290/mywhitty1/Mobile%20Uploads/image_1.jpeg (http://s67.photobucket.com/user/mywhitty1/media/Mobile%20Uploads/image_1.jpeg.html)

[sfcairborne]

Sorry Bullet sized 310 weighed in at 155 with gas check and lube. Works great in my 30/30 and 308. 300 blk is a Rem 700

[sundog]

Not in a bolt gun, but in an AR and enough to lock the bolt back:

RCBS 30-165-SIL
14.6 gr N110

[runfiverun]

I have the AAC built version of your Remington.
I use the same boolit as Corky, but on top of 9.5grs of AA#9 which gets me into the upper area of your window.
I'd be pretty comfortable using a different [than the rcbs] boolit for deer hunting out to 100 yds or so at the 1500fps area.

[Hamish]

Hasn't been chronographed, but I likes it a lot:

15.7 of Reloder 7

[sfcairborne]

Thanks guys, have any of you experienced the bullet jamming into the lands? Seated to the crimp grove, mine seem to be not just touching the lands but actually naming into them. Another problem I have with the bolt gun is it doesn't feed from the follower, you've got to feed it by hand like a single shot. But my 30/30 loves this Bullet. Loaded five with 748 this last wknd and at 25 yards placed 4 of the five in a single hole. Would post pics but can't seem to figure that part out. Going to stretch it to 50 then 75 this weekend with the 30/30

[runfiverun]

if your Rem. is like my AAC it can be picky about it's components.
for a little while I was blaming the boolits themselves for my chambering issues.
then when I got down to measuring things I found that my rifle has a tight chamber including the neck area.
if I used LC brass the neck area is too tight to allow anything over 308 in there smoothly and I did sweat the clearance issues.
so what I have to do to shoot cast in mine is use thinner name brand type brass or turn the necks on the LC stuff.

most of the 300 rifles I have seen have different ideas about what a throat and chamber dimension is.
stuff my aac won't chamber the ruger will, some of my aac's stuff won't chamber in my Bud's D.D. rifle and some will [shrug]
your feeding issue could just be oal related or it's the nose shape.

[sfcairborne]

Well I can't get to feed in my 308 but my 3030 love them . If some one can post pics I can send my target result for my 50yd firing. 26grn 748 set to crimp grove light crimp gave damn near a one hole group.5 shot firing string.

[popper]

Just pick the third from right (pic) button.

[sfcairborne]

175517175518

[sfcairborne]

The first one on the left is at 50 USA the second one is a dive shot group at 25yrd. 26grn 748 seated to crimp grove with a light crimp