View Full Version : Another 310 question
GOPHER SLAYER
06-28-2016, 04:06 PM
I would appreciate it if someone could tell me what cartridge priming die for the 310 tool that I have. It is stamped #11. It is close to the 30- 06 in size but the cartridge has a different rim. I tried the Lyman site for a half hour and gave up.
Mk42gunner
06-28-2016, 06:25 PM
I tried one of the .pdf's of one of the old Lyman manuals at castpics, not real sure but it looked like .45 Colt took a #11 priming chamber. I couldn't tell for sure, it may have been 14; the copy I was looking at was blurry, which didn't help my eyesight a bit.
Robert
dsh1106
06-28-2016, 06:39 PM
The data I have says 45 Colt
GOPHER SLAYER
06-28-2016, 06:46 PM
Thanks MK42. That was one case I didn't try. I am going to the shop, back in minute. Bingo, that's it. Boy it is hot out there, 98 in the shade. Thanks again.
dsh1106
06-28-2016, 06:53 PM
Gopher Slayer
this is a helpful site
http://www.endtimesreport.com/Lyman_310_Tong_Tools.html
GOPHER SLAYER
06-29-2016, 12:57 AM
Thanks dsh, now it is on my favorites list.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.