One last question for the Danes

[Mark Daiute]

Thanks for all the help with reloading for the Danish Rolling Block.

I have one last ( I hope) question.

What method are you using to trim down the length of the cases?

Thanks in advance,

Mark

[Many Klatch]

My rechambered Danish Rolling Block takes full length 45/70 brass so I no longer shorten the brass. Before I figured that out I used a hand cranked brass trimmer to remove .03" of length (I think that is correct). Just to save you a lot of mess with trying to do a chamber casting and all that. Just get a factory 45/70 loaded round and see if it will chamber into your gun. BTW, if you need an 11.7/56R die set I have one I would be glad to get rid of.

[texasnative46]

Many Klatch,

Check your mail.

yours, satx

[Mark Daiute]

Many Klatch,

Check your mai

yours, satx

so far nothing. email or inbox?

Thanks,

Mark

[texasnative46]

Mark,

I sent "Many Klatch" a PM yesterday. = NO answer yet.

yours, tex

[Many Klatch]

Oops sorry,i haven't been paying attention. I'll check