View Full Version : Bullet challenge
Anyone knows this bullet?
Diameter .209, length: 1.128" Weight: 178 grs in Linotype.
Thank's
Fishman
06-19-2016, 05:41 AM
Surely the diameter is .309?
Neat design, I don't recognize it.
runfiverun
06-19-2016, 10:03 AM
I bet castpic's knows
170730 Maker? reference? # ?
beagle
06-23-2016, 12:15 AM
Okay, that's more like it. Just guessing but it looks like the older version of the RCBS 30-180-SP. The second version was turned into a true spire point./beagle
beagle
06-23-2016, 12:20 AM
Check out castpics. Look for article on the RCBS 30SPs. I believe its a
Old 30-180-SP
Part Number: 82013
/beagle
Scharfschuetze
06-26-2016, 06:40 PM
Yep, that's the one.
Sorry I didn't see the post sooner. Here is a photo of the box and the mould. I bought this mould shortly after RCBS bought Ohaus out. Paid all of $12.74 for it at the time.
It's a really good design for most 30 cal rifles, although it favors rounds with long necks like the 30/06, the 30 Remington and the 30/40 Krag.
MT Chambers
07-03-2016, 08:40 PM
Anyone know if that bullet is tapered like my Loverin 311467?
Scharfschuetze
07-03-2016, 08:54 PM
It's a long body design that doesn't reduce in diameter until just forward of the scraping groove.
Look at Holo's photo of the boolit in the digital calipers. It will clarify your question.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.