The NOE-454-276-SWC "Keith" Molds

[noisewaterphd]

Just some pics to start off your weekend.

https://c8.staticflickr.com/8/7450/26833945063_9704dd1a21.jpg (https://flic.kr/p/GTdYZe)
NOE-454-276-SWC Keith Right Half Side View (https://flic.kr/p/GTdYZe) by Noisewater PHD (https://www.flickr.com/photos/139476041@N07/), on Flickr


https://c7.staticflickr.com/8/7447/26832069094_1d51b90072.jpg (https://flic.kr/p/GT4njW)
NOE-454-276-SWC Keith Left Half Side View (https://flic.kr/p/GT4njW) by Noisewater PHD (https://www.flickr.com/photos/139476041@N07/), on Flickr


https://c6.staticflickr.com/8/7587/26833940493_b3308958e9.jpg (https://flic.kr/p/GTdXCr)
NOE-454-276-SWC Keith Left Half Cavities (https://flic.kr/p/GTdXCr) by Noisewater PHD (https://www.flickr.com/photos/139476041@N07/), on Flickr


https://c5.staticflickr.com/8/7124/27407093076_5f42609be5.jpg (https://flic.kr/p/HKSvVw)
NOE-454-276-SWC Keith Right Half Cavities (https://flic.kr/p/HKSvVw) by Noisewater PHD (https://www.flickr.com/photos/139476041@N07/), on Flickr

[Hawks Feather]

That sure is a nice looking mold. Now you need to get it dirty.

[Harles Dawson]

Do the aluminum molds that Al has in stock now, have Keith's signature?
Thanks. Harles

[Cowboy_Dan]

Looks to me like it was done by a different engraver. Nice touch, though.

[clum553946]

Yes, the aluminum molds have Elmer Keith's "John Henry" on them.

[lablover]

Anyone work up a nice load for these yet in 45 colt?

[GSaltzman]

20.0 grains of 4227 give me an average of 1077 fps out of my 7.5" Ruger Bisley. They are powder coated.