shotman
05-16-2008, 02:57 AM
i posted a while back about a cheaper case feeder for a dillon 650 here is what i come up with---- you need to get a complete case feed set from Lee for their load master---- you need the orange shell feed for the dillon[i load pistol only on the dillon] take the bottom of the Lee shell feeder[black part with the 2in bolt and 4 holes] apart[small screw in center]--you need a 10-24 screw and small washer that will go in hex hole and a 10-24 nut for bottom-----next get an O ring that will fit over outside of orange shell feed and put it on----take the black Lee shell fed with the screw and screw it in that hole that is in top of press beside the orange shell adapter and set the feed hole over the orange adapter -----now you have a case feed that will take any case and only cost $25 -------if you need more in fo or the Lee parst no em at----ragebhardt@msn.com --- rick