Need a RCBS .40 S&W mold

[barnabus]

Can anyone recommend a RCBS non gas check mold that works for my FN .40 S&W? thanks for any help

[Crusty Deary Ol'Coot]

Barnabus,

I'd suggest, rather then an RCBS mold, buying a minimum of a 4 cavity aluminum mold from Tom of Accurate Molds.

He makes a quality product.

I have RCBS molds, along with Lyman, and the RCBS are much better quality of the two.

But, I also have a number of Tom's molds, 4 an 5 cavity. One of which is a mold for .40S&W/10mm. They cast great!!!!!!!!!!!.

If you already have an RCBS mold and handles, your half way there. I buy and use RCBS handles on my Accurate Molds.

Crusty Deary Ol'Coot

[catskinner]

I'm shooting an RCBS 40-180-CM in my 40 S&W Highpoint carbine. Only bullet I've tried so far. Feeds well and groups pretty good.

[barnabus]

I'm shooting an RCBS 40-180-CM in my 40 S&W Highpoint carbine. Only bullet I've tried so far. Feeds well and groups pretty good.

any leading problems?

[popper]

Accurate 40-165 works in all my 40sw. If I were younger I'd get the steel but don't think I'll wear out the Al one.

[catskinner]

barnabus, No sign of leading when cleaning after 150 rounds.

[barnabus]

barnabus, No sign of leading when cleaning after 150 rounds.

was there any reason you use the cowboy bullet vs the other design in ur 40?

[catskinner]

I had the cowboy mold already.

[Good Cheer]

Barnabus,
I was digging through the toy box today and found the Lyman HP 401638.
I'm gonna sell it as the project is cancelled. :?
Shoot me a message if you want.