.25 cal 51 gr. BBT Moulds Now Available at NOE

[rsterne]

The Group Buy is closed, and the moulds have been machined and are for sale in NOEs Online Store.... Those who participated in the Group Buy should have received their discount code.... additional moulds are available at the regular price.... They are available in 0.250" diameter with a 0.252" drive band.... or 0.253" diameter with a 0.255" drive band.... and in 2-5 cavity.... A single HP pin is available for $35 extra, along with mould wrenches and lube, holes for a temperature probe, top punches and other options.... http://noebulletmolds.com/NV/index.php?cPath=374_376

Bob

[rsterne]

For those of you new to casting, there is a board on the NOE Forum with "How-To" threads, and tons of information....

http://noebulletmolds.com/smf/index.php/board,7.0.html
(http://noebulletmolds.com/smf/index.php/board,7.0.html)
In addition, I just found out that NOE makes a sizing die system that consists of a holder, several size inserts, and punch holders, for $39.95.... with relatively inexpensive sizing bushings for either push through sizing of the whole bullet, or just sizing the nose.... The bushings are $9.75 each, and are available in most sizes.... I have approached Al about making the (slightly smaller) sizes we need for .22 cal, .25 cal, and .30 cal airgun bullets, and I'll let you know what happens.... Here is a link to how their sizing system works and how to set it up....

http://noebulletmolds.com/smf/index.php/topic,1245.0.html
(http://noebulletmolds.com/smf/index.php/topic,1245.0.html)
Bob