View Full Version : reducing bushing
bullet maker 57
05-06-2016, 05:11 PM
I need a 1" 12 x 7/8 14 bushing. Does anybody have any ideas where I might find one?
Calamity Jake
05-06-2016, 05:31 PM
That's real thin walls between the OD and ID threads, are you sure about the size?
KYCaster
05-06-2016, 11:22 PM
Lee Precision Classic Cast single stage press repair parts.
http://leeprecision.com/die-adapter-hex-bush.html
(http://leeprecision.com/die-adapter-hex-bush.html)
tja6435
05-07-2016, 11:30 AM
Pretty sure Dave Corbin makes one. Richard Corbin may offer one as well.
Hamish
05-07-2016, 12:06 PM
This?
http://www.midwayusa.com/Product/176245/lyman-7-8-14-thread-adapter-for-310-dies-and-model-55-powder-measure
Geezer in NH
05-07-2016, 04:28 PM
This?
http://www.midwayusa.com/Product/176245/lyman-7-8-14-thread-adapter-for-310-dies-and-model-55-powder-measureNo wrong one post 3 has what you want
bullet maker 57
05-08-2016, 05:06 AM
Thanks for the replies. I was tring to adapt a set of dies to another press. Figured out that the slot in the ram in my Rock Chucker had collapsed. Called RCBS and a new one is on the way.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.